P1000 Light bar and harness question

[Bones]

Can anyone tell me if these 2 would work well together? I really like the idea of a smaller light and not adding another switch.
https://www.amazon.com/gp/product/B07GSJR852/?tag=sxsweb24-20
DIY High Beam Trigger Wire Harness for Pioneer 1000

Thanks in advance.

 

[Admin]

 

[ToddACimer]

That should work. Anytime you have the high beams on you'll also get the light bar.

For the price of that light, I'd consider this as well. I have a 6", 2x 8" and a 20" RC single row light bars and they are great.

12-inch Cree LED Light Bar - (Single Row | Black Series)

 

[Hondasxs]

Says 2.8 Amps.
Ya. that will be fine.
We have tested up to 7 amps but recommend staying under 5.

 

[JenElio]

Can anyone tell me if these 2 would work well together? I really like the idea of a smaller light and not adding another switch.
https://www.amazon.com/gp/product/B07GSJR852/?tag=sxsweb24-20
DIY High Beam Trigger Wire Harness for Pioneer 1000

Thanks in advance.

That will work! I have a 10" and a 20" slim also. I have the 10" hooked to the high beams and the 20" on a separate switch. I agree with @ToddACimer the light linked seems to be pretty steep. Check ebay, mine were about $30 each and they've held up great

 

[JenElio]

Definitely get the harness it makes it super easy! Put some dialectic grease and your set