CumminsPusher
Just a Honda doing Honda things.
Lifetime Member
Supporting Member
Club Contributor
How were the led’s adjusted (rotated?) when the 3 slot clip is keyed (one is larger)?
Sent from my iPhone using Tapatalk
russknight
Well-Known Member
Lifetime Member
https://amazon.com/gp/product/B073ZDLKT9/?tag=sxsweb24-20
If you hover over the picture, you'll see a very small allen head screw with a series of holes in the black plastic part of the lamp that locks into the reflector housing. This enables the lamp to be rotated 360 degrees and set in a number of different positions. Also notice the way the individual LED's are arrayed on the lamp. If installed out of the box without removing the set screw and setting both lamps so the LED arrays are positioned the same on both sides of the buggy, the light pattern will be different on each side and thus scattered. These are really bright lights and make a big difference over stock.
If you hover over the picture, you'll see a very small allen head screw with a series of holes in the black plastic part of the lamp that locks into the reflector housing. This enables the lamp to be rotated 360 degrees and set in a number of different positions. Also notice the way the individual LED's are arrayed on the lamp. If installed out of the box without removing the set screw and setting both lamps so the LED arrays are positioned the same on both sides of the buggy, the light pattern will be different on each side and thus scattered. These are really bright lights and make a big difference over stock.
Thanks. The JDM ASTAR does not have adjustments.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
