
QuadMan747
Well-Known Member
a Pioneer 1000 maybeI think a flat roof would look bad ass. But no on the aluminum roof. For durability, you can't beat the thick tough ass plastic roofs. But where would you get one.![]()
a Pioneer 1000 maybeI think a flat roof would look bad ass. But no on the aluminum roof. For durability, you can't beat the thick tough ass plastic roofs. But where would you get one.![]()
Wouldn't that be a couple inches wider??a Pioneer 1000 maybe
Could be, I'm not sure of the widths up top.Wouldn't that be a couple inches wider??
I'll check it for you today when I get home.Could you tell me what clearance you have as far as headroom goes with a helmet on, and how tall you are?
I'm 6' tall and without a helmet on under stock room, I have about 8" headroom in driver's seat, and about 10" in the rear seat. I'm guessing a helmet will take 2" away from that, and I'm wondering what the minimum headroom I would be comfortable with. I'm thinking 4" above the helmet.
@eastenn I sat in the front and tried to measure the best I could Lol. Without the Soundbar I would have around 6 inches to the top of my head sitting up very straight. I would have at least that amount in the back as well.
Thanks for checking that. That sounds about right by my measurements. Looks like if I take 4 inches off my top, me being 6' tall, say 2" for helmet, that would only leave me 2-3" clearance. Not sure if that's going to be enough.
Sounds like you might be better off going a custom cage route. If I decide to keep mine long term I'll probably end up going that route as well.
Sent from my iPhone using Tapatalk
View attachment 30799 Here it is to scale the best I could measure with each square 2". The dashed line was the best scenario I could come up with under 74", but at 74" to the top, that means I would be ducking or hitting the tube all the time getting in and out.