Jackal's 2024 Talon 1000X-4 Bolt on Bonanza! 😎

[JACKAL]

Thanks for CA TECH running thier 20% discount today only for Veterans and first responders. 🫡

Saved me $144 😎

Finished out my under carriage protection needs. Even got a shift gate for an additional 30 HP and 3 second 0-60 times a 🤣

 

[Admin]

 

[JACKAL]

Now that's some proper A-Arm & no drill Trailing Arm Guards 3 side coverage from Factory UTV.

View attachment 449658


Trail Armor full skids just arrived as well, haven't un- boxed them yet. Got something to keep me busy for the next few hours 🙂

Really happy with how these mounted up. 3 bolts across the top and 3 drain holes in bottom one near each end and one under the flared section of shock mount.

Really impressed with how the Trail Armor skids are mounting up. About 75% done, only 10 holes to drill for nutserts, very happy about that. Had to stop for rock guards, those 5mm oem hex screws were inserted with a 1" drive impact hammer and used green sleeve retainer loctite, jeezus. Gotta get a 5mm impact driver bit to remove them bastards 😤

 

[Scrappapotamus]

Really happy with how these mounted up. 3 bolts across the top and 3 drain holes in bottom one near each end and one under the flared section of shock mount.

View attachment 449675



Really impressed with how the Trail Armor skids are mounting up. About 75% done, only 10 holes to drill for nutserts, very happy about that. Had to stop for rock guards, those 5mm oem hex screws were inserted with a 1" drive impact hammer and used green sleeve retainer loctite, jeezus. Gotta get a 5mm impact driver bit to remove them bastards 😤

You may need to incorporate the use of a heat gun. Head of the bolt with care. If you want to install something permanently, use the green stuff. Good luck

 

[SuperATV]

Hey @SuperATV you know what missing from your windshield and real panel? The tinted poly upper doors all the way around! Hint, hint, chop chop, get them fab bois on it, Momma wants them by Christmas

View attachment 449389
View attachment 449390

You might get lucky on that!! Not sure if there were any door/cage changes that would effect the fitment.....but it looks like we're going to have the upper poly doors ready SOOOOOON!!! Like.....maybe even next week?!?!

 

[JACKAL]

You might get lucky on that!! Not sure if there were any door/cage changes that would effect the fitment.....but it looks like we're going to have the upper poly doors ready SOOOOOON!!! Like.....maybe even next week?!?!

I need a set to do a review and install video for the Talon 1000X-4 😁

 

[MTUTV]

Is this the new cab? Just saw this on Super ATV.