Improve Ground Clearance

Bama-Daniel

Bama-Daniel

Well-Known Member
Lifetime Member
Feb 25, 2021
800
7,952
93
Priceville, Alabama
Ownership

  1. 1000-5
Hoping to get some ideas on how to improve ground clearance on my P1K-5. We went to Ride Royal Blue this past weekend and our stock P1K-5 had issues with rutted trails.

I know a lift would help drastically but I’m concerned with a rough ride. I’m planning on adding some bigger tires which I know will help some. Any suggestions on brand? I’m thinking 28s. I would like to keep from rubbing.

I’ve read about angled a arms but can’t find where anyone did this mod and what happened to ride quality. Does anyone have any experience with this?

All suggestions are greatly appreciate.
 
Bama-Daniel

Bama-Daniel

Well-Known Member
Lifetime Member
Feb 25, 2021
800
7,952
93
Priceville, Alabama
Ownership

  1. 1000-5
Yes. I figured I was going to beat that horse. Later I’m going to post on 2nd battery then start a winch conversation.

Just kidding. Seriously just hoping to see if arched a arms makes the ride stiffer. Wife has a bad back and need to keep ride as good as possible. Read where tires might improve ride but wasn’t sure if that holds true.
 
Remington

Remington

POIDH Enforcement Officer
Lifetime Member
Supporting Member
Jul 24, 2016
20,256
115,787
113
Michigan
Ownership

  1. 1000-5

  2. Talon X
Yes. I figured I was going to beat that horse. Later I’m going to post on 2nd battery then start a winch conversation.

Just kidding. Seriously just hoping to see if arched a arms makes the ride stiffer. Wife has a bad back and need to keep ride as good as possible. Read where tires might improve ride but wasn’t sure if that holds true.
Or a witch windshield question lol.
No, your good man.

No, they should not change that. To soften the ride you want to get some socks especially to go along with the arms. Fox qs3’s are my shock of choice. You can pre load them to get hight as well as u can do with other aftermarket shocks.
do u have an LE? If u do, u already have the Fox’s. Any other type has the usless teeth filling loosener stockers lol.
 
bigshoe

bigshoe

Well-Known Member
Aug 17, 2020
422
1,427
93
26560
Ownership

  1. 1000-5
Stay with radial tires they ride alot better than bias ply. I'm running 28 carnivores, I've tried every tire from terrabites to super swampers. carnivores are my favorite so far. 28 is the biggest without rubbing.
 
Montecresto

Montecresto

Montecresto el segundo
Lifetime Member
Supporting Member
Club Contributor
Jan 17, 2016
22,584
34,172
113
Eastern oklahoma
Ownership

  1. Other Brand

  2. 500

  3. 1000-3

  4. 1000-5

  5. Talon X4
Hoping to get some ideas on how to improve ground clearance on my P1K-5. We went to Ride Royal Blue this past weekend and our stock P1K-5 had issues with rutted trails.

I know a lift would help drastically but I’m concerned with a rough ride. I’m planning on adding some bigger tires which I know will help some. Any suggestions on brand? I’m thinking 28s. I would like to keep from rubbing.

I’ve read about angled a arms but can’t find where anyone did this mod and what happened to ride quality. Does anyone have any experience with this?

All suggestions are greatly appreciate.
On tires and the ride, you may want to bear in mind sidewalls. A heavier sidewall gives better protection from sharp rock slices/punctures but gives a much stiffer ride…
 
Bama-Daniel

Bama-Daniel

Well-Known Member
Lifetime Member
Feb 25, 2021
800
7,952
93
Priceville, Alabama
Ownership

  1. 1000-5
Or a witch windshield question lol.
No, your good man.

No, they should not change that. To soften the ride you want to get some socks especially to go along with the arms. Fox qs3’s are my shock of choice. You can pre load them to get hight as well as u can do with other aftermarket shocks.
do u have an LE? If u do, u already have the Fox’s. Any other type has the usless teeth filling loosener stockers lol.
Yes the windshield. Forgot that and the heat shield too!

I‘ve actually learned a lot from all the threads I must admit. I’ve got a deluxe. I was dead set on a LE for a long time. Covid hit and I couldn’t find any LEs plus I wasn’t a fan of the color options. Really liked the grey LE but I’m really happy with ours too. Definitely would like to add the Fox’s. Thanks for the tip.
 
Bama-Daniel

Bama-Daniel

Well-Known Member
Lifetime Member
Feb 25, 2021
800
7,952
93
Priceville, Alabama
Ownership

  1. 1000-5
Stay with radial tires they ride alot better than bias ply. I'm running 28 carnivores, I've tried every tire from terrabites to super swampers. carnivores are my favorite so far. 28 is the biggest without rubbing.
Perfect, thanks. I did see where 28 was the rubbing limit for stock set up. Wasn’t sure on make but already like the way the carnivores look. Our riding is primarily trails and I figure those will give us the grip if we find a little mud.
 
Bama-Daniel

Bama-Daniel

Well-Known Member
Lifetime Member
Feb 25, 2021
800
7,952
93
Priceville, Alabama
Ownership

  1. 1000-5
On tires and the ride, you may want to bear in mind sidewalls. A heavier sidewall gives better protection from sharp rock slices/punctures but gives a much stiffer ride…
Thanks. Haven’t considered the rocks impact on sidewall. Do you know if a thicker sidewall is rougher than a stock ride? Ours is stock right now and the ride is not bad. Even a little rougher is fine just don’t want it to be like a log truck on the trails.
 
Montecresto

Montecresto

Montecresto el segundo
Lifetime Member
Supporting Member
Club Contributor
Jan 17, 2016
22,584
34,172
113
Eastern oklahoma
Ownership

  1. Other Brand

  2. 500

  3. 1000-3

  4. 1000-5

  5. Talon X4
Do you know if a thicker sidewall is rougher than a stock ride?
Oh absolutely. There’s some tires out there with sidewalls so stiff you can ride them home flat…

But man what a compromised ride…..😳

Don’t run thin sidewall tires on too low of pressure, you’ll damage them….

There’s just too many opinions on tires here, it’s very subjective. Get you some Tensor Regulators….😂 right @Plumber32
 
advertisement
bigshoe

bigshoe

Well-Known Member
Aug 17, 2020
422
1,427
93
26560
Ownership

  1. 1000-5
I've flattened tusk trilobites 8ply HD and a super swamper bogger. Which I didn't think it could be done but I did it, ripped sidewalls out of them both. My experience is don't matter what tire it is a sharp rock hit wrong will go through anything.
 
ToddACimer

ToddACimer

Pioneer 1005-2
Lifetime Member
Oct 7, 2016
3,678
15,562
113
Oshkosh, Wi
Ownership

  1. 1000-5
I have 30" EFX Motovators, Superatv arms front and rear and stage 4 Elkas. The ride is awesome, the ground clearance is good and I really enjoy the machine on rougher trails. It's awesome on fire roads and higher speed stuff too.

PXL 20210724 173055562
 
Last edited:
Smitty335

Smitty335

Well-Known Member
Lifetime Member
Supporting Member
Oct 3, 2016
35,445
208,726
113
NWA Arkansas
Ownership

  1. 1000-3

  2. 1000-5
I have 30" EFX Motovators, Superatv arms front and rear and stage 4 Elkas. The ride is awesome, the ground clearance is good and I really enjoy the machine on rougher trails. It's awesome on firelands and higher speed stuff too.

View attachment 285762
I run basically the same set up, different tires and different Stage on the Elka's. I really like the Elka's, but stage 4 is all you need.
 
  • Like
Reactions: JenElio and TimG

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!