High clearence arms front and rear

[Tramguage1]

Let me know what you guys have and why you like or dislike.

 

[Admin]

 

[Smitty335]

Let me know what you guys have and why you like or dislike.

View attachment 243932

Those are your stock A Arms, aren't they? We've got Supper ATV A Arms, the gripe about them from me is, you have to unbolt them from the frame to adjust alignment, other than that no issues.

 

[Hometeam]

L and W. I have there front and will be getting the rears soon. J Sport is gtg also!

 

[PaulF]

Front I have L&W. They seem to provide the most additional clearance. I highly recommend them.

Rear I have AMRC. They are GARBAGE, get something else. They provide excellent clearance but they use garbage Heim joints and they hit the exhaust pipe. I had to spend hundreds more on good Heims and modify them to make them work correctly.

 

[Lil_Steve]

Let me know what you guys have and why you like or dislike.

View attachment 243932

L&W front and rear here. Absolutely zero complaints from me but I did read about a front arm failure on this forum not long ago. Here, I found the post..

Need help finding stronger front upper and lower control arms and rear lower control arms

Hey everyone, I was just curious if anyone knew where I could find stronger than factory front upper and lower control arms and rear lower control arms for a talon 1000x. Since i'm prone to breaking stuff, I might as well get the best bang for my buck. Any help would be greatly appreciated.

hondasxs.com

One other thing I like is the lifetime warranty offered.

Here's my L&W front arms, they give great clearance, have stock offset and are not adjustable.

Here's my L&W rear radius arms, strong, good clearance and high quality heim joints.

 

[Tramguage1]

Got a set of upper and lower rears on order from Joe Wooster at Ultra Offroad.
@Lil_Steve
Im very interested in some more pics of the fronts.

 

[Lil_Steve]

Got a set of upper and lower rears on order from Joe Wooster at Ultra Offroad.
@Lil_Steve
Im very interested in some more pics of the fronts.

Just took a few pics in the garage...

This one shows how high up they go for most of the axle length.

Behind the drivers side wheel

Pass side

I tried to get a close up of the welds..

Let me know if you want a pic of a different angle.

 

[JTW]

L&W front and rear here. Absolutely zero complaints from me but I did read about a front arm failure on this forum not long ago. Here, I found the post..

Need help finding stronger front upper and lower control arms and rear lower control arms

Hey everyone, I was just curious if anyone knew where I could find stronger than factory front upper and lower control arms and rear lower control arms for a talon 1000x. Since i'm prone to breaking stuff, I might as well get the best bang for my buck. Any help would be greatly appreciated.

hondasxs.com

One other thing I like is the lifetime warranty offered.

Here's my L&W front arms, they give great clearance, have stock offset and are not adjustable.


View attachment 243959

Here's my L&W rear radius arms, strong, good clearance and high quality heim joints.

View attachment 243960

@Tramguage1 this is the route I would go if I were you and I couldn’t consider a KRX.

 

[CID]

Just took a few pics in the garage...

This one shows how high up they go for most of the axle length.

View attachment 243968

View attachment 243969

Behind the drivers side wheel

View attachment 243970

Pass side

View attachment 243971

I tried to get a close up of the welds..

View attachment 243972

View attachment 243973


Let me know if you want a pic of a different angle.

🤔

 

[SuperATV]

Hey buddy! Just let me know if you need me! I've got it all ready to go...

 

[Lil_Steve]

🤔

View attachment 244082

Crack is wack, just say no. I think what you were seeing in the first pic was the winch mount laying over the frame.

 

[SpeedBuggy]

Let me know what you guys have and why you like or dislike.

View attachment 243932

I went with L&W front and rear. Really opens up the clearance.