H.F.A.W.H.A. meeting

BrophyCreek

BrophyCreek

Well-Known Member
Lifetime Member
Supporting Member
May 8, 2016
520
3,242
93
New Richmond, WI
Ownership

  1. 1000-5
Cheers boys! Ca677f58ba150892c458ec7d148bc5e5

Sent from my SM-G781V using Tapatalk
 
  • Like
Reactions: SuperATV, Plumber32, CumminsPusher and 7 others
BrophyCreek

BrophyCreek

Well-Known Member
Lifetime Member
Supporting Member
May 8, 2016
520
3,242
93
New Richmond, WI
Ownership

  1. 1000-5
But....Houston, we have a problem. Went to upgrade my 16 to 22 tie rods, but found that the stud on the outer joint is only 10mm. On my 16, they are 12mm. The inner is the same on both and the OAL looks right. Must be wrong outer ends?2fd6f857e95adf5172ef98e65d870f0b

Sent from my SM-G781V using Tapatalk
 
  • Like
Reactions: Plumber32, Fatsquatch and JenElio
BrophyCreek

BrophyCreek

Well-Known Member
Lifetime Member
Supporting Member
May 8, 2016
520
3,242
93
New Richmond, WI
Ownership

  1. 1000-5
BrophyCreek said:
But....Houston, we have a problem. Went to upgrade my 16 to 22 tie rods, but found that the stud on the outer joint is only 10mm. On my 16, they are 12mm. The inner is the same on both and the OAL looks right. Must be wrong outer ends?View attachment 405895

Sent from my SM-G781V using Tapatalk
Click to expand...
Update, I just looked up the part and they are for a P500. Ughh! Dang parts guy got me again!
 
  • Haha
  • Like
  • Sad
Reactions: Red500, Plumber32, Mudwisel and 3 others
TripleB

TripleB

Well-Known Member
Lifetime Member
Aug 13, 2018
20,613
180,247
113
Caryville, Tennessee
Ownership

  1. 1000-3

  2. 1000-5
BrophyCreek said:
But....Houston, we have a problem. Went to upgrade my 16 to 22 tie rods, but found that the stud on the outer joint is only 10mm. On my 16, they are 12mm. The inner is the same on both and the OAL looks right. Must be wrong outer ends?View attachment 405895

Sent from my SM-G781V using Tapatalk
Click to expand...

BrophyCreek said:
Update, I just looked up the part and they are for a P500. Ughh! Dang parts guy got me again!
Click to expand...
I'm not saying they ain't the ones for the 500 but the newer tierod ends are a smaller diameter stud. They probably are the correct ones. You will need the correct nuts to complete the install.
 
Last edited:
  • Like
Reactions: ToddACimer, Plumber32, Fatsquatch and 2 others
BrophyCreek

BrophyCreek

Well-Known Member
Lifetime Member
Supporting Member
May 8, 2016
520
3,242
93
New Richmond, WI
Ownership

  1. 1000-5
TripleB said:
I'm not saying they ain't the ones for the 500 but the newer tierod end are a smaller diameter stud. They probably are the correct ones. You will need the correct nuts to complete the install.
Click to expand...
Yes! I am missing both my nuts, LMAO! Took me way too long to figure that out. @ToddACimer had said the same. But, I mixed up the part bags (inner vs outer) and chased my tale on Partzilla like a dumbass. As logic would have it, the P1K inner part # starts with the same first five as the P5 inner. But, I was looking for outer, so...Yup...Derp
 
Last edited:
  • Haha
  • Like
Reactions: Scoop, TripleB, Pilgrim and 3 others
advertisement
Fatsquatch

Fatsquatch

Approved Member
Lifetime Member
Supporting Member
Jan 30, 2018
120,975
1,009,150
113
Hidden
BrophyCreek said:
Yes! I am missing both my nuts, LMAO! Took me way too long to figure that out. @ToddACimer had said the same. But, I mixed up the part bags (inner vs outer) and chased my tale on Partzilla like a dumbass. As logic would have it, the P1K inner part # starts with the same first five as the P5 inner. But, I was looking for outer, so...Yup...Derp
Click to expand...
Phuckin’ parts guy anyway! 🤣
Nomo
 
  • Haha
  • Like
Reactions: ToddACimer, Smitty335, Plumber32 and 4 others
advertisement
You must log in or register to reply here.
Top Bottom