H.F.A.W.H.A. meeting

[JenElio]

View attachment 401430
Cheers!

You open a tire shop?
What are the TSL's going on?

 

[Admin]

 

[JenElio]

View attachment 401430
Cheers!

What bushings are those? I need some new ones pretty soon....

 

[TripleB]

You open a tire shop?
What are the TSL's going on?

They are Frontline ACP tires.

 

[JenElio]

They are Frontline ACP tires.

Ohh, though they were the TSL's. The Frontlines are what @Plumber is running on the T1K right?

 

[TripleB]

What bushings are those? I need some new ones pretty soon....

Those are garage product bushings. I got about 3k miles out of them this time. I think I got about 1500 miles the first time. It's the 2nd time he has made them up. I only got about 800 miles out of the original superatv bushings.

 

[TripleB]

Ohh, though they were the TSL's. The Frontlines are what @Plumber is running on the T1K right?

Yes

 

[TripleB]

You open a tire shop?
What are the TSL's going on?

I got these for the pioneer but I believe they're gonna be way to big. They have about 35 psi right now.

 

[JenElio]

Those are garage product bushings. I got about 3k miles out of them this time. I think I got about 1500 miles the first time. It's the 2nd time he has made them up. I only got about 800 miles out of the original superatv bushings.

I never ran the SATV bushings, I got the RB3 and have about 1,300 miles on them but my front left uppers have some play. I need to do the upgraded bolt/tab deal

 

[JenElio]

I got these for the pioneer but I believe they're gonna be way to big. They have about 35 psi right now.

30s?

 

[TripleB]

30s?

Yes

 

[TripleB]

30s?

Next to a wore out 30 inch blackwater with 10 psi

 

[JenElio]

Yes

What do they measure mounted on wheel?

 

[JenElio]

View attachment 401433View attachment 401434

Next to a wore out 30 inch blackwater with 10 psi

At 35 PSI though, look like a fat guy holding in a fart

 

[TripleB]

What do they measure mounted on wheel?

31 on concrete and using a level at 35 psi. I've had them mounted a couple of weeks but my s*** is in pieces.

 

[JenElio]

31 on concrete and using a level at 35 psi. I've had them mounted a couple of weeks but my s*** is in pieces.

Mine's been stripped down to the frame for almost a month now. That's what happens when we own JUNK!!

 

[Smitty335]

I never ran the SATV bushings, I got the RB3 and have about 1,300 miles on them but my front left uppers have some play. I need to do the upgraded bolt/tab deal

I have the RB3 bushings probably a little over 2,000 miles, time to replace. This time I will install new bushings and drill a hole in the bushing through the zert fitting hole to get grease to the bolt and replace bottom balljoint.

 

[JenElio]

I have the RB3 bushings probably a little over 2,000 miles, time to replace. This time I will install new bushings and drill a hole in the bushing through the zert fitting hole to get grease to the bolt and replace bottom balljoint.

I don't know bout the others but RB3 bushings are groved inside so grease can reach the sleeves. I've had no problem with them other then my right front upper but that was caused by the bolt phucking up the hole in the frame tab so it started to create a little bit of play........stupid rough TN trails!!!

 

[Smitty335]

I don't know bout the others but RB3 bushings are groved inside so grease can reach the sleeves. I've had no problem with them other then my right front upper but that was caused by the bolt phucking up the hole in the frame tab so it started to create a little bit of play........stupid rough TN trails!!!

But not the bolt.

 

[JenElio]

But not the bolt.

No, I don't believe the bolt is intended to be greased. Although........I rubbed some on while sliding it in .........-SHE-

NoMo!!

 

[Adam490]

Thank Christ I had the lords tires on to drag the driveway. Didn’t even need diff lock!