Govt Mule 2024 Talon 1000R Parts Addition Thread

[GovtMule]

Nice!

Wish I’d have done this vs the big light bar down low at times as the light bar is blocking some of the air flow when the SATV window is opened on the first slot.

We will see how I feel long term, but I think it will work well.

 

[Admin]

 

[JayPo]

Done. I put a piece of rubber in between the bracket and the windshield just to reduce any chance of rattle between the two. It’s solid and stable. Shouldn’t shake under motion.

View attachment 437969

That looks good. I have those same lights that I might do the same.

 

[Vikes79]

I’m still wondering where the fishing tackle is going? Are you really sure you can’t run lights and sirens on your pov? 🤣🤣

 

[GovtMule]

I’m still wondering where the fishing tackle is going? Are you really sure you can’t run lights and sirens on your pov? 🤣🤣

One of those really sweet cam locking overhead “fishing rod” mounts would be pretty cool, but I’m trying to escape fishing when running this machine…not making it more fishing friendly!

 

[Adam490]

One of those really sweet cam locking overhead “fishing rod” mounts would be pretty cool, but I’m trying to escape fishing when running this machine…not making it more fishing friendly!
View attachment 438129

Is that a 300 or a 5.56? If it's a 5.56, how does that suppressor hold up to the short barrel length? I have a 7.5" SBR upper that I wanted to suppress but was always worried about nuking the baffles.

 

[GovtMule]

Is that a 300 or a 5.56? If it's a 5.56, how does that suppressor hold up to the short barrel length? I have a 7.5" SBR upper that I wanted to suppress but was always worried about nuking the baffles.

It’s just a stock photo I picked up from the mount site. I have no idea. I’ve got a 10.5” with a suppressor for work, but I rarely use it. Can’t give much insight other than when I have used it cleaning is a b****. Makes a mess. (Twss)

 

[Scoop]

Is that a 300 or a 5.56? If it's a 5.56, how does that suppressor hold up to the short barrel length? I have a 7.5" SBR upper that I wanted to suppress but was always worried about nuking the baffles.

I have a Dear Air Wolfman on an AR-9 pistol (9MM) from Brigade Mfg. It originally came with a 5.5" barrel, but I swapped it out for a 6" Angstadt Arms barrel because I needed just a little more room for the Dead Air muzzle brake for the suppressor.

I've put hundreds of 9MM rounds down range with that can and that short 6" barrel, and have never experienced any issues, including baffle strikes.

I really like the Wolfman. It can suppress 9mm, 5.56, 300BLK, 7.62×39, 350 Legend, and .357 Mag. I have muzzle brakes on the AR9, an AR15 SBR in 5.56, and even put a booster setup on the Glock 19. The nice thing about the Wolfman is that, if you're gonna run it on a handgun, the front third spins off and you move the front cap to the shorter version of the can (7.5" down to 5.13"). It's wipe compatible too.

That can on a 300AAC with subsonic ammo would be damn near as quiet as a church mouse.

 

[GovtMule]

Bosman finally shipped the bumper. Should be here early next week.

Finished the turnpro install last night around midnight. Went ahead and ran a wire to the back for rear lights while I had the console out again. Ran out of steam and started losing tools and stuff so I called it a night. Hopefully can get it buttoned up this evening. Tired of looking at parts scattered all over my garage!

 

[GovtMule]

Finally. TurnPro finished

Auxbeam 6 Gang

Underhood wiring complete along with custom made mud/splash guard for the tunnel area.

Finally the @Hondasxs cube lights on custom brackets on the lower flip windshield brackets

 

[Mopower58]

Finally. TurnPro finished
View attachment 438309View attachment 438310View attachment 438311
Auxbeam 6 Gang
View attachment 438312

Underhood wiring complete along with custom made mud/splash guard for the tunnel area.

View attachment 438313View attachment 438314
View attachment 438316
Finally the @Hondasxs cube lights on custom brackets on the lower flip windshield brackets
View attachment 438315

Looks great!

 

[Coeus]

Finally. TurnPro finished
View attachment 438309View attachment 438310View attachment 438311
Auxbeam 6 Gang
View attachment 438312

Underhood wiring complete along with custom made mud/splash guard for the tunnel area.

View attachment 438313View attachment 438314
View attachment 438316
Finally the @Hondasxs cube lights on custom brackets on the lower flip windshield brackets
View attachment 438315

Nice! So clean

 

[Mopower58]

Finally. TurnPro finished
View attachment 438309View attachment 438310View attachment 438311
Auxbeam 6 Gang
View attachment 438312

Underhood wiring complete along with custom made mud/splash guard for the tunnel area.

View attachment 438313View attachment 438314
View attachment 438316
Finally the @Hondasxs cube lights on custom brackets on the lower flip windshield brackets
View attachment 438315

Is Backwoods cutting your parking carpet? 🤣

 

[GovtMule]

@Mopower58 No. I prefer the concrete. Just like to step out onto carpet.

 

[Buggyman]

Finally. TurnPro finished
View attachment 438309View attachment 438310View attachment 438311
Auxbeam 6 Gang
View attachment 438312

Underhood wiring complete along with custom made mud/splash guard for the tunnel area.

View attachment 438313View attachment 438314
View attachment 438316
Finally the @Hondasxs cube lights on custom brackets on the lower flip windshield brackets
View attachment 438315

Nice work looks good

 

[GovtMule]

Nice work looks good

I watch way too many car shows and am amazed by their customization skills. I can’t hold a candle to what they do, but I have the mind for it!!, just not the equipment or the ability. I’m pleased with what I’ve done so far. It’s been fun but I’m ready to hit the trails!

 

[Buggyman]

I watch way too many car shows and am amazed by their customization skills. I can’t hold a candle to what they do, but I have the mind for it!!, just not the equipment or the ability. I’m pleased with what I’ve done so far. It’s been fun but I’m ready to hit the trails!

For sure there is a lot of talent out there but now it's time to get down and dirty nomoomp

 

[GovtMule]

For sure there is a lot of talent out there but now it's time to get down and dirty nomoomp

Troof

 

[Rayger143]

Finally. TurnPro finished
View attachment 438309View attachment 438310View attachment 438311
Auxbeam 6 Gang
View attachment 438312

Underhood wiring complete along with custom made mud/splash guard for the tunnel area.

View attachment 438313View attachment 438314
View attachment 438316
Finally the @Hondasxs cube lights on custom brackets on the lower flip windshield brackets
View attachment 438315

I really like the all black. Sweet lookin ride ya got there. Nice work.

 

[Scoop]

Nice! So clean

Save this pic. It will never be this clean again!

 

[Remington]

TurnPro finished

Well fuc!
Wish they had that set up when I got mine🤨
Always something better😂
Looks sleek and very nice.