P1000m5 GlockMeisters P1K5 Build Continues

[BWAF]

Also added a bracket made by @knuckledeep to hold rigid boxes. Works very well! Welded a couple nuts to the cross supports. 4 bolts in to secure itView attachment 206622View attachment 206621

View attachment 206620

All looks good

 

[Admin]

 

[GlockMeister]

All looks good

Thank ya sir! I won't win any awards for my welding skills....i call em gorilla welds...aint pretty..but they're strong lol

 

[BWAF]

Thank ya sir! I won't win any awards for my welding skills....i call em gorilla welds...aint pretty..but they're strong lol

I did some welding today think I forgot how lol your look fine !!

 

[GlockMeister]

I did some welding today think I forgot how lol your look fine !!

You can make any weld presentable with enough grinding and paint!

 

[BWAF]

You can make any weld presentable with enough grinding and paint!

I did 3 coats with brush hard to get grinder in there

 

[Haldog77]

Added some roof wear strips...or "payne strips" ad @joeymt33 Calls them. View attachment 186691
View attachment 186693

Those strips are a fantastic idea.

 

[trigger]

Also added a little thump with a wetsounds 8in powered sub.
View attachment 206619

View attachment 206618

Now you're talkin'! 🤘

 

[LarryAmboy]

Thank ya sir! I won't win any awards for my welding skills....i call em gorilla welds...aint pretty..but they're strong lol

Gorilla welds = big, strong and ugly


Sent from my iPad using Tapatalk

 

[GlockMeister]

Added some d rings and a new black anodized hawse..

 

[JTW]

Added some d rings and a new black anodized hawse..
View attachment 208222

Did you plate behind those?

 

[GlockMeister]

Did you plate behind those?

1/8th in plate just a little bigger than the shackle, big fender washers, and grade 8 bolts....it aint pullin through.

 

[JTW]

1/8th in plate just a little bigger than the shackle, big fender washers, and grade 8 bolts....it aint pullin through.

That’s how I did mine. Just be aware you’ll hear them occasionally and think “what the hell was that?”

 

[Remington]

1/8th in plate just a little bigger than the shackle, big fender washers, and grade 8 bolts....it aint pullin through.

Looks good! That’s what I did (with a plate) when I had those types of D rings. Held good.

 

[GlockMeister]

Finally got the other crossmembers reinforced. Its so much easier to do this stuff with a lift!

 

[Adam490]

What'd you use to reinforce them? I had some angle but it ended up sticking out to far so I need to get something else.

 

[GlockMeister]

Ruff stuff tube reinforcement... @ToddACimer reccomended them and they fit great in there. You will need 2.

Universal Tube Reinforcement (Single)

Check out the deal on Universal Tube Reinforcement (Single) at RuffStuff Specialties

www.ruffstuffspecialties.com

 

[Russ989]

Finally got the other crossmembers reinforced. Its so much easier to do this stuff with a lift!View attachment 208861View attachment 208862View attachment 208863View attachment 208864

You sold me on it, I’m ordering some. Going to use some for the side rails as well.

 

[Haldog77]

Finally got the other crossmembers reinforced. Its so much easier to do this stuff with a lift!View attachment 208861View attachment 208862View attachment 208863View attachment 208864

Sure makes it easier to take good pics as well. Thanks

 

[ToddACimer]

Ruff stuff tube reinforcement... @ToddACimer reccomended them and they fit great in there. You will need 2.

Universal Tube Reinforcement (Single)

Check out the deal on Universal Tube Reinforcement (Single) at RuffStuff Specialties

www.ruffstuffspecialties.com

Looks good! I swear it'll feel like the whole frame is stiffer next time you ride

 

[ohanacreek]

That’s how I did mine. Just be aware you’ll hear them occasionally and think “what the hell was that?”

I couldn’t stand it had to change away from them.