J
JTW
Guest
You’ll be happy you did!I couldnt help myself. I had to throw this conical air filter on my Diy snorkel!
View attachment 56391 View attachment 56392
You’ll be happy you did!I couldnt help myself. I had to throw this conical air filter on my Diy snorkel!
View attachment 56391 View attachment 56392
How's this one working so far? It looks like you've had it on a while now. Any issues with water splash, etc?$23 from Napa. Stock rough filter will push right in the end. Adds about 8" height compared to stock inlet and also moves it to a safe spot verses right up front where water can easily splash in....View attachment 45389
Sent from my SM-G920V using Tapatalk
Seriously considering this. You still liking this setup? I'm also looking at the Snorkel Your ATV snorkel too.I went the same route as @Macory. This was a good idea. Ordered the Gates hose from Amazon. They are up to $33 now. Picked up a pack of hose clamps from Advance Auto for $3. It took some effort to get the hose over the nipple but that's ok, it was a good tight fit. Liked about a 1/4" getting the hose pushed down all the way. Put the hose clamp on and stuffed the stock filter in the end. View attachment 56096View attachment 56097
Sent from my SAMSUNG-SM-G930A using Tapatalk
No complaints so far.Seriously considering this. You still liking this setup? I'm also looking at the Snorkel Your ATV snorkel too.
Just to be safe I put some holes near the end and put a couple pieces of coat hanger through it to keep the stock filter from getting sucked in.No complaints so far.
Sent from my SAMSUNG-SM-G930A using Tapatalk
I can out of air box into 3" tee then reduced to 2 - 1.5" flex pipes that come up each side of air box. Use 2" x 3" female coupler coming out of air box. Used dremel to grind inside out to 2.5" so no loss in air flow. Used warrior risers for a finished look. Pics are from mock up. I did add a 3" rubber connection between air box and tee to make easier to remove for maintenance. A little trimming to air box cover and front panel of bed to allow snorkel to clear and every thing works good.
View attachment 51524 View attachment 51525 View attachment 51526
Hi, I know this an old thread but I like your snorkel. I was hoping you could send me a few more pics of the routing you used for each of the hoses and what you had to trim off to make it all work.
I really like this setup . Do you still have a link as to what hose you got off amazon ?I went the same route as @Macory. This was a good idea. Ordered the Gates hose from Amazon. They are up to $33 now. Picked up a pack of hose clamps from Advance Auto for $3. It took some effort to get the hose over the nipple but that's ok, it was a good tight fit. Liked about a 1/4" getting the hose pushed down all the way. Put the hose clamp on and stuffed the stock filter in the end. View attachment 56096View attachment 56097
Sent from my SAMSUNG-SM-G930A using Tapatalk
Ancient thread. @urbancoyboyja hasn't been on site since January. Put an @ in front of the name if you want the person to get notified.I really like this setup . Do you still have a link as to what hose you got off amazon ?
Thanks
Thanks . I got it ordered on on the way .Ancient thread. @urbancoyboyja hasn't been on site since January. Put an @ in front of the name if you want the person to get notified.
Here's the link you are after: https://www.amazon.com/gp/product/B000CRBPIW/?tag=sxsweb24-20