P1000 Custom Mirror Brackets Made for Honda OEM Soft Doors.

[GROR]

A-Pod HSD Multi-Pod & A-Pod Mirror Bracket: Custom-made for Honda OEM Soft Doors.​

FITS: 14-25 Honda Pioneer 1000-1000-5-1000-6 ​

Our A-Pod Brackets are made specifically for the Honda OEM soft doors. We have two bracket configurations available: the A-pod HSD (Honda Soft Door) Multi-pod that will also mount a 50-54’’ lightbar, and the A-Pod HSD mirror-only bracket. Both models have a 10mm bolt hole, and we provide a 10 mm-8 mm reducer so that the brackets will work with various 10 mm and 8mm single-bolt mirrors. When we tested mirrors, we found that the tusk mirrors worked the best. However, we only tested the Seizmik Embark and never tested the Seizmik Pursuit or Strike UTV Side View Mirror.

Testing included running the mirror into trees at various speeds, which was nothing extreme, but if you wondered why the brackets are made from 1/4'' steel, there's a reason. The A-Pod Brackets' Solid steel construction is designed to withstand the most extreme punishment, allowing the mirror to fold in when hit and return to its original position in one move.

Available at - www.ghostrocksoffroad.com

 

[Admin]

 

[Wisco pioneer]

Do you just drill holes into the plastic to mount the bracket

 

[JNo323]

@GROR, has anyone tried these on a Talon with OEM soft doors?

 

[GROR]

Do you just drill holes into the plastic to mount the bracket

Yes you do

 

[GROR]

@GROR, has anyone tried these on a Talon with OEM soft doors?

No I have not tried them. The bolts are 12mm and the hole centers is 1 1/4 on the pioneer. I know the 700 uses a smaller bolt and the bolt centers do not line up.

 

[JNo323]

Spacing on Talon is 1-1/8”. Thanks for details.

 

[GROR]

Spacing on Talon is 1-1/8”. Thanks for details.

I believe the bolts used on the Talon are 10 mm, but I'm not sure. if you would like to try our bracket and test it on the Talon, please let me know.