P1000 Cumminspusher-the New Ride

[CumminsPusher]

Thanks for the info cp. Going to start saving my pennies now.

Sent from my SM-G900V using Tapatalk

I didn't say they were cheap but I was able to choose. Luckily it's not the same price as the "other brand" they looked that up and we're ready to get me a 1400 dollar bar locally I said "let me see if I can find one cheaper" they were very happy

 

[Admin]

 

[CumminsPusher]

Upper roof mount backups in out of the way

.
The lowers done as well. Front lower fascia crees in.

 

[Chipper]

I really like the lights mounted on the fenders. It was super easy to mount and the wire tucks under the fender just a couple inches away. I can adjust it on the fly if I need to and so can a passenger for the other side.

I would highly recommend it.

Thanks and great idea!! I will do mine like this.

 

[Chipper]

Cp you never cease amaze me! Great ideas with the lights!! y'all keep me glued to the site all day and all night and every second! Got the buggy and About to start my build, it will be a frankenstine collection from y'all, great ideas guys

 

[GlockMeister]

Upper roof mount backups in out of the wayView attachment 17682 View attachment 17681 .
The lowers done as well. Front lower fascia crees in.

Love the backup light. Been trying to figure out where to put my backups think I just found the answer.

 

[CumminsPusher]

No 1 1/4 but do whatcha gotta do. Leaving tomorrow but I think my alignment problem is fixed.

 

[GlockMeister]

It's out of the way and works with the window. Nice avatar

Was trying to get them up high without interfering with my soft rear panel. This will work perfectly. And thank you

 

[CumminsPusher]

sorry dude im lazy and dint read through your posts. what happened? did you buy a new rig out of pocket? last i heard honda abandoned you and you were out 4k on a engine and labor?

Insurance came through and paid most of what was owed. The motor really would've been tough go through there were three parts unavailable

 

[CumminsPusher]

Was trying to get them up high without interfering with my soft rear panel. This will work perfectly. And thank you

You're welcome. I tried several spots and that seems the best. I did mount directly to the roof they will vibrate just a little but roof will hold up fine. Rubber bumpers between the ROPS and roof panel next to the lights does the trick and will still allow the roof to move around when a tree is smacked. Also have 15w Cree below to take light directly up to the back

And in each rear step for good corner light that are all on backup system.

 

[GlockMeister]

You're welcome. I tried several spots and that seems the best. I did mount directly to the roof they will vibrate just a little but roof will hold up fine. Rubber bumpers between the ROPS and roof panel next to the lights does the trick and will still allow the roof to move around when a tree is smacked. Also have 15w Cree below to take light directly up to the back View attachment 17687

And in each rear step for good corner light that are all on backup system. View attachment 17688

I have light envy!

 

[CumminsPusher]

Let's just say it was said before that a pioneer can't follow a rzr in the woods...a rzr with 4 people cannot follow us ESPECIALLY at night! WE LOVE THE WOODS! Lights are very important for us. They make things happen. we add a couple with each rig. 90% of this was on our last one. It wasn't all bought for this one. Someday hopefully shocks!

 

[rubicon05]

CP...for the flush mounts on the front....did you turn them around....mark the holes for the bolts...drill...than make the cut for the light to go through? I have the lights and ready to do that exact same mode but was worried about measuring/cutting correctly the 1st time

 

[CumminsPusher]

CP...for the flush mounts on the front....did you turn them around....mark the holes for the bolts...drill...than make the cut for the light to go through? I have the lights and ready to do that exact same mode but was worried about measuring/cutting correctly the 1st time

i took the 6 hex out and the face came out you can make diagram that way. I cut a bunch of fins off for weight (makes huge difference) then made a brace to the light to the front 12 bumper bolt. Sturdys it up for branch hits. These lights are money and found thier home back on this build. They totally take care of side light because of the angle. They don't snag on anything. If you notice nothing will ever stick out on our rig in any way if it does it becomes litter

 

[rubicon05]

I thought mine were a bit heavy too.....I may think about trying to cut some fins off....great idea

 

[sugarray]

Will you show the back side of one when you get back, please?

 

[CumminsPusher]

Will you show the back side of one when you get back, please?

 

[CumminsPusher]

I thought mine were a bit heavy too.....I may think about trying to cut some fins off....great idea

The plastic where the lower hex is in the fascia will rip out if somethings not done. Most will benefit from just weight loss but we still managed to rip it. The brace fixes that and keeps the light from vibrating.

 

[CumminsPusher]

Dash in

 

[Eltobgi]

View attachment 17694 Dash in

From the photo it looks like you've got a few extra set of hands

 

[CumminsPusher]

I did and I am greatful!!! My boy stayed up helping and my wife and her friend helped. 2:30 on a work day for us all yes I appreciated that it kept me going. The p1k5 made it in time!! It's going today