P1000 Control arms

[dukeANhammer]

I run SATV 4 inch portals with cfab arms

Honda Pioneer 1000 Forward A-arm Kit 16-21′

Constructed of 1.25″ x .188″ wall DOM Fits year models 2016-2021 only Fits 1000 3/5, LE, Deluxe Compatible with 814 and Fox shocks Features a full 2″ of forward rake to allow for larger tires 3″ of lift built in to front and rear arms Works with OEM tie rods and ends Comes with 5/8″ […]

shopcfabusa.com

 

[Admin]

 

[ToddACimer]

Which Elka’s do you have? Feedback on them? Anything you would do differently?


Sent from my iPad using Tapatalk

Stage 4 Elkas. They have been great. Only thing I struggle with now is brakes. Between 30" tires which are quite a bit taller and heavier than stock and the significantly improved ride quality the brakes are pretty lame

 

[Smitty335]

Stage 4 Elkas. They have been great. Only thing I struggle with now is brakes. Between 30" tires which are quite a bit taller and heavier than stock and the significantly improved ride quality the brakes are pretty lame

Are you running the SS brake lines? They help.

 

[LarryAmboy]

Are you running the SS brake lines? They help.

What Smitty said and might want to service the brake fluid.


Sent from my iPhone using Tapatalk

 

[ToddACimer]

What Smitty said and might want to service the brake fluid.


Sent from my iPhone using Tapatalk

Has fresh fluid and stainless lines

 

[SuperATV]

Who are we talking about? Who is HE?

@SuperATV

🤣🤣🤣

 

[red1329]

Does anyone have any preference on either the super atv or the high lifter arms? About to order one or the other, just can't decide which ones to go with.

not to throw a wrench in you plan here.. super atv price have gone up.. you can still find the rear arms on amazon for the old price.
i chose to go with the CFab arms.. if you get new ball joints and buy from extreme snorkels and use the 5% off coupon you can get out of there for 1007$ no taxes or shipping!! that's 3" lift front and rear. 2" forward in the front. no new offset in the rear. allows you to run up to 32" tires.


this link has the deals and setup i found and went with
spent a lot of time figuring out the cheap/best option.

P1000 - lift, forward a arm, tires, spacers, overall ride quality

first off i have a 2016 pioneer 1000 i have done a 1" spacer on the shocks that came out to about 1.5" lift. so im looking at running 30"or 32" on my machine. I want to keep this relatively low cost. but at the same time I want my machine to work for me when I need it to.. so my questions are...

hondasxs.com

 

[Phiber]

I run SATV 4 inch portals with cfab arms

Honda Pioneer 1000 Forward A-arm Kit 16-21′

Constructed of 1.25″ x .188″ wall DOM Fits year models 2016-2021 only Fits 1000 3/5, LE, Deluxe Compatible with 814 and Fox shocks Features a full 2″ of forward rake to allow for larger tires 3″ of lift built in to front and rear arms Works with OEM tie rods and ends Comes with 5/8″ […]

shopcfabusa.com

How do you like your cfabs? Waiting on mine to get here

 

[red1329]

if you buy from cfab us the code "cfab" its cheaper but you'll have to pay for shipping and that get expensive depending on where your live.
extreme snorkels use "save5off" it is free shipping and no tax.. check both sites and see what comes out to be cheaper..

cfab arms are also adjustable camber.
cfab arms have a 6-8 week wait time.




the cheapest/ best option would be to buy Super ATV front arms for there adjustable camber, high lifter rear arms cuz there cheap. and then buy just the new ball joints form CFAB with the coupon.. then press them in yourself.. then make a spring spacer if you need lift.. extreme snorkels also has all of this you can buy from him..


thats 650 for front satv and rear highlifter arms plus 145 for the ball joints from cfab..
total of 795$
just went with cfab because of the built in lift.

 

[nubbinninja]

I have Mighty Tite tiedowns in an enclosed trailer and do not want to move them. My question will the SATV change the overall width. It fits tight now and even if it changes the width a little gonna be a pain.

 

[Phiber]

if you buy from cfab us the code "cfab" its cheaper but you'll have to pay for shipping and that get expensive depending on where your live.
extreme snorkels use "save5off" it is free shipping and no tax.. check both sites and see what comes out to be cheaper..

cfab arms are also adjustable camber.
cfab arms have a 6-8 week wait time.




the cheapest/ best option would be to buy Super ATV front arms for there adjustable camber, high lifter rear arms cuz there cheap. and then buy just the new ball joints form CFAB with the coupon.. then press them in yourself.. then make a spring spacer if you need lift.. extreme snorkels also has all of this you can buy from him..


thats 650 for front satv and rear highlifter arms plus 145 for the ball joints from cfab..
total of 795$
just went with cfab because of the built in lift.

had no idea Cfab wait time was that far out, said 1-2 weeks. Might have to decide on something else

 

[red1329]

I have Mighty Tite tiedowns in an enclosed trailer and do not want to move them. My question will the SATV change the overall width. It fits tight now and even if it changes the width a little gonna be a pain.

all the arch a arms we are talking about are going to leave your unit at the same width.. arms like TTC make actually require longer axels and those will be wider.... any lift your give your unit is going to actually narrow your units some because the swing of the arms will bring your tires in as you go up.

 

[red1329]

had no idea Cfab wait time was that far out, said 1-2 weeks. Might have to decide on something else

yeah the cfab wait is the only thing that bothered me.. no way around it either.. but for what your getting lift and high arch a arms that are adjustable and ball joints for 1007$ you just cant beat that price and the 2" forward vs the 1.5" is a huge improvement.

 

[nubbinninja]

all the arch a arms we are talking about are going to leave your unit at the same width.. arms like TTC make actually require longer axels and those will be wider.... any lift your give your unit is going to actually narrow your units some because the swing of the arms will bring your tires in as you go up.

Thanks I thought...

 

[dukeANhammer]

How do you like your cfabs? Waiting on mine to get here

I like them, no problems to report.

 

[grabbe123]

High Lifter arms front and back!

 

[Robobrainiac]

High Lifter arms front and back!

View attachment 265860 View attachment 265861

I am confident you will have a great time with those add ons!