CANCELED - The 2020 PIONEER TAKEOVER - A Honda SxS Club, Group Ride! April 24th & 25th, 2020!

[Russ989]

Getting closer... What's everybody still have to do to their machines to get them ready ? I've got some frame gussets to weld in and then I need to go through and put weldable nutserts for the skid. Can't take the self-tappers any more.... Other than that I feel like I've got my machine pretty well sorted. I do need to work on the alignment though now that everything has settled.

Adam, why do you do this to me? I can’t keep thinking about my pioneer, I’m hemorrhaging money over here! 💰 🏦 😭 😂

 

[Admin]

 

[Adam490]

Did You have to adjust Your front camber any from when You installed SATV pre set A-Arms, I think mine will be ok I put them on and drove it around a while it has been almost two months they seem to be pretty much 0 deg. checking with an angle finder,,,,

Yes, I've got a little negative camber up front after riding it in some rough terrain and everything settling in. Probably a turn in on each side should get me at, or really close to, 0*.

 

[Neohio]

Adam, why do you do this to me? I can’t keep thinking about my pioneer, I’m hemorrhaging money over here! 💰 🏦 😭 😂

Did you do weld washers before bolting up your front arms?

 

[Russ989]

Did you do weld washers before bolting up your front arms?

No I didn’t, I’m going to drive it a bit and let everything settle in and then I’m going to pull them and beef up the frame tabs.

 

[Neohio]

No I didn’t, I’m going to drive it a bit and let everything settle in and then I’m going to pull them and beef up the frame tabs.

I'll put your name on my last set of washers, you will want them before they start tearing up the factory tabs.
I need to get some more machined.

 

[Russ989]

I'll put your name on my last set of washers, you will want them before they start tearing up the factory tabs.
I need to get some more machined.

Thanks, what do I owe you?

 

[Neohio]

Thanks, what do I owe you?

We will discuss at Takeover.

 

[Russ989]

We will discuss at Takeover.

Sounds good

 

[farmtimpioneer]

At some point in time do We ever get to where We are happy and satisfied with these things or do We always think the grass will be greener with another modification, maybe we should start a Pioneer Modification Hotline, PMH,, here's Your sign you may have a problem if your house is falling apart but Your Pioneer always looks good and ready for the next trail,,,,,,

 

[Russ989]

At some point in time do We ever get to where We are happy and satisfied with these things or do We always think the grass will be greener with another modification, maybe we should start a Pioneer Modification Hotline, PMH,, here's Your sign you may have a problem if your house is falling apart but Your Pioneer always looks good and ready for the next trail,,,,,,

I’m already drooling and daydreaming about a KRX 1000! I’ve always liked four wheeling but ever since buying my second pioneer and going to the TO I’ve been hooked. Crazy, this all started when I went in to buy a foreman rubicon. 💰 😂

 

[farmtimpioneer]

I’m already drooling and daydreaming about a KRX 1000! I’ve always liked four wheeling but ever since buying my second pioneer and going to the TO I’ve been hooked. Crazy, this all started when I went in to buy a foreman rubicon. 💰 😂

Why not a Talon R with Turbo Loaded,,,,,,,,

 

[Neohio]

I’m already drooling and daydreaming about a KRX 1000! I’ve always liked four wheeling but ever since buying my second pioneer and going to the TO I’ve been hooked. Crazy, this all started when I went in to buy a foreman rubicon. 💰 😂

My 1000 was bought as a glorified golf cart for our campground. I was driving home from the mall one Saturday morning with the wife and suggested we swing by the Honda dealer to check out a Pioneer to use around camp.

Well, ever since that Saturday morning, she greatly dislikes when I stop anywhere unannounced!

Everything was fine and dandy with the ownership of ours, until 12/26/16. The day I decided to join this forum. Ever since then, it has been downhill. But in a good way. Our first takeover was 2017 and she absolutely fell in love with the members and more importantly their wives during our short stay. I can honestly say, I've never met a better group of people than this forum. You get in a pickle and reach an obstacle that freaks you out? Someone will jump in and take your machine past it. None of the my junk is bigger than yours stuff.
If you've reached your limit, someone will jump in and bring you past. no hard feelings, maybe some light ribbing. but all in good fun.

 

[Leukic]

The only thing I have done is Wheels and tires. And with remodeling rooms in the house It doesnt look like I will doing much else besides putting gas in it for the takeover 😞

 

[Adam490]

The only thing I have done is Wheels and tires. And with remodeling rooms in the house It doesnt look like I will doing much else besides putting gas in it for the takeover 😞

That's all you need, gas and go!

 

[Russ989]

Why not a Talon R with Turbo Loaded,,,,,,,,

I like the Talons and they are awesome machines but not what I’m looking for in a sport sxs. The KRX is built like a tank and I like the layout better.

 

[Russ989]

My 1000 was bought as a glorified golf cart for our campground. I was driving home from the mall one Saturday morning with the wife and suggested we swing by the Honda dealer to check out a Pioneer to use around camp.

Well, ever since that Saturday morning, she greatly dislikes when I stop anywhere unannounced!

Everything was fine and dandy with the ownership of ours, until 12/26/16. The day I decided to join this forum. Ever since then, it has been downhill. But in a good way. Our first takeover was 2017 and she absolutely fell in love with the members and more importantly their wives during our short stay. I can honestly say, I've never met a better group of people than this forum. You get in a pickle and reach an obstacle that freaks you out? Someone will jump in and take your machine past it. None of the my junk is bigger than yours stuff.
If you've reached your limit, someone will jump in and bring you past. no hard feelings, maybe some light ribbing. but all in good fun.

You’re right, a lot of great people here.

 

[Adam490]

My 1000 was bought as a glorified golf cart for our campground. I was driving home from the mall one Saturday morning with the wife and suggested we swing by the Honda dealer to check out a Pioneer to use around camp.

Well, ever since that Saturday morning, she greatly dislikes when I stop anywhere unannounced!

Everything was fine and dandy with the ownership of ours, until 12/26/16. The day I decided to join this forum. Ever since then, it has been downhill. But in a good way. Our first takeover was 2017 and she absolutely fell in love with the members and more importantly their wives during our short stay. I can honestly say, I've never met a better group of people than this forum. You get in a pickle and reach an obstacle that freaks you out? Someone will jump in and take your machine past it. None of the my junk is bigger than yours stuff.
If you've reached your limit, someone will jump in and bring you past. no hard feelings, maybe some light ribbing. but all in good fun.

Similar story for me. I was looking for a Honda Foreman forum and one of the Google searches brought me to a thread on here about a Rubicon. I read through it and then started poking around in the build threads. I only see machines built to ride around in the mud down here, so I thought it was really cool to see these trail/rock rigs. Joined the forum on 4/7/19 and then had the Pioneer on the trailer 3 days later after reading through just about every build thread there was. Convinced my dad to come to TO2019 with me and I've been hooked ever since. Made some really good friends and have had a blast on every ride.

 

[Russ989]

Similar story for me. I was looking for a Honda Foreman forum and one of the Google searches brought me to a thread on here about a Rubicon. I read through it and then started poking around in the build threads. I only see machines built to ride around in the mud down here, so I thought it was really cool to see these trail/rock rigs. Joined the forum on 4/7/19 and then had the Pioneer on the trailer 3 days later after reading through just about every build thread there was. Convinced my dad to come to TO2019 with me and I've been hooked ever since. Made some really good friends and have had a blast on every ride.

True that, I remember you and your dad jumping in with our group out on the trail. Good times!

 

[Neohio]

Similar story for me. I was looking for a Honda Foreman forum and one of the Google searches brought me to a thread on here about a Rubicon. I read through it and then started poking around in the build threads. I only see machines built to ride around in the mud down here, so I thought it was really cool to see these trail/rock rigs. Joined the forum on 4/7/19 and then had the Pioneer on the trailer 3 days later after reading through just about every build thread there was. Convinced my dad to come to TO2019 with me and I've been hooked ever since. Made some really good friends and have had a blast on every ride.

I bet you never thought in a million years you'd leave your 3 week old machine out of sight at some random members campsite so you wouldn't have to trailer it back to your hotel.

 

[Adam490]

I bet you never thought in a million years you'd leave your 3 week old machine out of sight at some random members campsite so you wouldn't have to trailer it back to your hotel.

For sure, haha! Figured you guys had much nicer machines than mine so I'd be better off leaving it with strangers with nicer toys if someone came along to steal one 😂