P500 Battery Junction Box

[Garlicfarmer]

Well I'm slowly getting Stuff added to my 2023 P500.
Got a nice rear rack, my Honda factory roof, Glove Box, Phone Holder, and Superwinch Terra 3500Sr installed.
Now that I have12 volt cables from the battery ran up front under the hood for the winch I am thinking of running those to a junction box for ease of ?? Jumping a dead battery or adding other 12 volt things.
Any advise or had anyone done this ?
Getting to a dead battery in that battery box to jump start the P500 out in the middle of the world is not easy.
Be nice just to open the front hood and attach jumpers to the junction box.
Ken in Oregon

 

[Admin]

 

[Mudder]

My method for the same need was mounting these terminal posts under the hood. Provides a clamp point for a jump start as well as a source for the winch and other accessories or fuse block. I did add a 300 amp waterproof switched breaker on the new cables, close to the battery box exit on the frame behind the passenger seat.
Some Amazon examples.

 

[KYhillbilly]

I used a blue sea buss bar but the connections are large enough to use to jump start off of as well.