B
Has installed a super atv poly rear window. Wanting to know if i could still use my rear nets with it??
NTCPrezJB
President of #NTC
Lifetime Member
Supporting Member
@SuperATV would know.
He also knows about the super secret #NTC discount code for zero percent off of your order. PM him for details.
#SuperATV
#NTC
Gahhhh....Nope. Not going to work with the rear nets on the 1k5.
NOTES:
NOTES:
- Not compatible with Honda cab enclosure doors
- Pioneer 1000 only - Not compatible with OEM roofs
- Pioneer 1000-5 only - Installation requires permanent removal of the rear window nets
B
I can read the decription. Im wanting to know why? I will just have to figure out how to make it work
NTCPrezJB
President of #NTC
Lifetime Member
Supporting Member
Message @GuyOnABuffalo he could really help out in this situation
Because it was designed to be used without the rear nets. Didn't you read the description ?
Coeus
Major General
Lifetime Member
You could try liquid nails instead of brackets?
DrShotgun
Well-Known Member
Lifetime Member
Supporting Member
Or you could remove all the points where the nets attach to the rear ROPS and try that?
Coeus
Major General
Lifetime Member
advertisement
DrShotgun
Well-Known Member
Lifetime Member
Supporting Member
Coeus
Major General
Lifetime Member
Coeus
Major General
Lifetime Member
toddvdh
Well-Known Member
Lifetime Member
I installed that rear window on my 1000-5 a couple weekends ago. There isn’t enough room for the screws that hold the back of the net on. I did end up using 2 zip ties and got them through the bracket.
So yes, with a couple zip ties you can make the rear nets still work.
So yes, with a couple zip ties you can make the rear nets still work.
Smitty335
Well-Known Member
Lifetime Member
Supporting Member
Whack, whack, whack and it will!
toddvdh
Well-Known Member
Lifetime Member
Another note. SuperAtv included directions in my box for the 1000-3. Which is totally different than the 1000-5. I figured it out off pictures on the internet. Kind of a pain, hopefully they can check that out before they send yours.
Coeus
Major General
Lifetime Member
Pics or it didn’t happenI installed that rear window on my 1000-5 a couple weekends ago. There isn’t enough room for the screws that hold the back of the net on. I did end up using 2 zip ties and got them through the bracket.
So yes, with a couple zip ties you can make the rear nets still work.
toddvdh
Well-Known Member
Lifetime Member
Here is the net and I circled the offending bracket that I had to zip tie to. You didn’t say it had to be a good picture.
Yes it works but for the mount where the rear window goes just use a zip tie to reattach, works fine that way.
advertisement
