I'm really hoping someone that has a pic of their 700-4 on a 14' trailer vs. a 12' for comparison. Thanks community.
I had to use a 5x10 to pick mine up. It's all I had. Tires rubber both sides but it went on.You'll need 6 footer for Sure, I don't know how many people show up to buy a 700 wirh a 5 foot wide trailer. Track width on a P700 is 60 inches, most 5 foot trailers aren't truly 60 inches inside.
I need to buy a trailer too, and will go with a 16'. They pull better than a shorter trailer in my opnion.No pic available but I have a 14' PJ dovetail with the side loading ramps on the front for loading my 4 wheeler sideways. It's long enough but I would rather find a way to load the 4 wheeler on the back and get the Pioneer 700-4 to the front. It seems heavy loaded on the very rear of the trailer but if you ever have any intention of having a 4 wheeler or maybe even putting a toolbox on the trailer I would go with a 14 footer. I really wish I had a 16 footer just to have plenty of room.
I have a 84"x16' and I think I over bought. I planned on loading some ATVs on there but never did. I does pull straight with no swayI need to buy a trailer too, and will go with a 16'. They pull better than a shorter trailer in my opnion.
Too bad you are not closer, maybe I could have bought it from you.I have a 84"x16' and I think I over bought. I planned on loading some ATVs on there but never did. I does pull straight with no sway
I went right to the manufacture in eastern NC..$2000 OTD. Aluminum would be nice , but pricey as hellToo bad you are not closer, maybe I could have bought it from you.
There are several trailer manufacturers here in Texas which is good because they are competitively priced.I went right to the manufacture in eastern NC..$2000 OTD. Aluminum would be nice , but pricey as hell
You'll need 6 footer for Sure, I don't know how many people show up to buy a 700 wirh a 5 foot wide trailer. Track width on a P700 is 60 inches, most 5 foot trailers aren't truly 60 inches inside.
The overal width is around 59.5” correct?
I’m one of the ones who plan on using a 5’x10’ trailer as well, I have a clear opening on 60.5”. It will be close, but should work. Fingers crossed.
Think mine is 8 X 18, perfect! I can load my P1 with room to spare on the sides and have the length to haul my log splinter or mower to the cabin. Paid $ 2,900.00 new, got brakes and LED lights. It's a Big Tex. Tandem axel, 2 inch tube rails. Pulls great!The overal width is around 59.5” correct?
I’m one of the ones who plan on using a 5’x10’ trailer as well, I have a clear opening on 60.5”. It will be close, but should work. Fingers crossed.