P1000 5+2 or 4+3 ? 4/136 - 4/137

[niederc]

View attachment 199794You’ll be pretty wide with 4/3 offset. My guess nominally around 67”. As long as you don’t have trail width restrictions your ok. You’ll probably get a lot of mud flung in the buggy without fender flairs. I’d personally stick with 5/2 offset with the 1” spacers in the rear. It’s what most people do here it’s good results. This is what 65.5” looks like.

Mud flung in the buggy, that's not good. The wife and grandkids would never go for that. I try to avoid mud but sometimes you just can't. I think now i better go with a 5+2 offset. One other thing, my buggy is all stock so should i be concerned about rubbing with 28x10-14 tusk terrabites. By the way, that's a nice buggy you got there. Also, where did you get your 1" spacers at?

 

[Admin]

 

[GWH]

Mud flung in the buggy, that's not good. The wife and grandkids would never go for that. I try to avoid mud but sometimes you just can't. I think now i better go with a 5+2 offset. One other thing, my buggy is all stock so should i be concerned about rubbing with 28x10-14 tusk terrabites. By the way, that's a nice buggy you got there. Also, where did you get your 1" spacers at?

Go w the 5x2 1” spacer in rear, that is what most on this forum have done.member RBR or something like that makes quality spacers.

 

[GWH]

RB3 off road for spacers

 

[niederc]

RB3 off road for spacers

Should i be concerned about rubbing with 28x10-14 on a stock machine?

 

[100Acre]

The 1st two equations both equal 7. I can't do math in my head but 4 divided by 136 or 137 me thinks is gonna give you a negative number. 🎓🤓

 

[Schmeg]

Should i be concerned about rubbing with 28x10-14 on a stock machine?

I think you’ll be fine. Supposedly you can go up to 27.5” without any rubbing on these things. My Pitbulls measure 27.25” and they are fine. I understand Terrabites run small for their listed size. I used RB3 spacers.

 

[niederc]

I think you’ll be fine. Supposedly you can go up to 27.5” without any rubbing on these things. My Pitbulls measure 27.25” and they are fine. I understand Terrabites run small for their listed size. I used RB3 spacers.View attachment 199867

Ok thanks a bunch for the information. Going to order when the cascade wheel gets back in stock

 

[niederc]

I did the exact same thing as you. Bought 5 wheel/tire in the same size to be able to have a spare. I used Tusk products from ATV Parts, ATV Tires, Dirt Bike Parts, Motocross Gear, Motorcycle parts and Motorcycle Tires | Rocky Mountain ATV/MC. Went with 28x10-14 with a 5+2 offset. They were a 4/137 bolt pattern and fit perfectly.
I measured wheel width before and after and my measurements are below. I added the Fox shocks at the same time with the preload set to factory, and gained about an inch of ground clearance all around as well. Thats without pre-loading for another 1/2" or more.

Stock:
Front wheel total width 62”
Rear wheel total width 63”

Aftermarket
Front wheel total width 63”
Rear wheel total width 64 1/2”
View attachment 199594View attachment 199596View attachment 199595

Is that decal on your tailgate or did you paint the letters? If its a decal, do you mind if i ask where you got them?

 

[ImHowl]

Is that decal on your tailgate or did you paint the letters? If its a decal, do you mind if i ask where you got them?

Facebook. Guy named Kent Hill.
I follow a group called Honda Pioneer Riders. Join the group and search his name. He makes a good product, every review I have ever seen is good.

 

[Remington]

We like to support our venders if you can please and thank you

@jrplaza2008 Creative UtV graphics he makes those as well (I have one on my gate) and fantastic service. He really stands behind his product. Plus will make anything you want. Check him out in the venders section.

 

[niederc]

Facebook. Guy named Kent Hill.
I follow a group called Honda Pioneer Riders. Join the group and search his name. He makes a good product, every review I have ever seen is good.

ok thanks

 

[Sjc3081]

Im considerlng 6+1 offset on all four corners

 

[niederc]

We like to support our venders if you can please and thank you

@jrplaza2008 Creative UtV graphics he makes those as well (I have one on my gate) and fantastic service. He really stands behind his product. Plus will make anything you want. Check him out in the venders section.

Ok, will do.

 

[Mudwing]

Facebook. Guy named Kent Hill.
I follow a group called Honda Pioneer Riders. Join the group and search his name. He makes a good product, every review I have ever seen is good.

I got my tailgate decals from him. I think he’s @thevinylcreator on here. Great service from him. 😉

 

[Emmer75]

Here’s mine, 4+3 wheels with 1.5” spacers in the rear and 1” spacers up front with 30x10-14 on all four corners.

View attachment 199664View attachment 199665

Russ, your machine looks great. Few questions. I have 1" spacers all the way around and the super atv 3" lift. What wheel/tire package did you use, do you have any suspension or lift modifications? Also any clearance while turning up front with those bigger tires?

 

[Kasmin]

I have heard that 4/3 on front causes suspensions stresses and steering issues. I would go 6/1 front 5/2 rear..