P1000 29" tires on factory pioneer 1000-3

[catvguy1986]

Hello,

I have a 2020 Honda Pioneer 1000-3 it came with 27" tires on it.....Can I put 29" tires on it with the stock wheels? Want to make sure no rubbing, etc.

So tire sizes would be 29x11r14 & 29x9r14

THX

 

[Admin]

 

[Lochsa88]

have heard true 29 will rub a little. Several threads on this topic, and what wheel offset you need if change. i went to 28x10x14 (carnivores) on all four corners, so i can rotate. bought tusk wheels from Rocky Mtn and had shipped with tires mounted. and i didnt add the spacers some suggest, not needed. i prefer to keep tire under fender and extended flares (mudbusters).

 

[Soaz1000]

P1000 - 29” BFG quick review

I haven’t seen any p-1000 guys post about the newish BFG KM3 size (29/11-14 and 29/9-14) yet but I pulled the trigger after a bunch of research. I’m in southern AZ and wanted a tougher, larger, quieter than stock tire for my P1000-5 deluxe on stock wheels. Clearance is acceptable (second pic is...

hondasxs.com

Depends on the actual height of the tires. Some tires run smaller than sized. If your suspention is stock a better choice is 28" If you plan on running a aftermarket skid plate there is usually a lip that turns up at the bottom of the wheel well. 29" won't fit unless you trim and run forward arched A arms.

 

[scaffoldmatt]

I am running 29’’ tires on stock wheels and have not had any trouble. I think I could get away with 30’’.

 

[Robobrainiac]

32s on a stock pioneer could fit in a straight line..

As others have said a true 29 will rub. If you want bigger tires grab some forward arms and send it.

 

[bumperm]

Bigger? Well, anything more than a handful is . . . oh wait, what were we talking about?

 

[Robobrainiac]

Bigger? Well, anything more than a handful is . . . oh wait, what were we talking about?

Not beans. That's for sure.

 

[Remington]

I am running 29’’ tires on stock wheels and have not had any trouble. I think I could get away with 30’’.

Your joking right? 🤣
better get that tape measure out, I bet them 29‘s measure out as 28’s
Unless u have some other mods to help this? If its true #POIDH.

 

[aandersonpa]

Depends on the tire. I put on System 3 xtr 370 28x10x14 on stock rims and have barely a finger width-space at full turn and half compression. Tires measure true 28 mounted.