L
I’m a new owner of a 2022 1000-5 Deluxe with the pre installed switch panel where there are 3 pre wired on/off switches in the control panel. Can anyone tell me how I can connect these to accessories?
NTCPrezJB
Retiring Member
Lifetime Member
Supporting Member
Hondasxs
Club Founder
Staff member
Lifetime Member
Supporting Member
Not many know how those work, but I do.
There just dead switches. There also not lit.
Blue tape under hood above second battery cubby. There you will find the dead end loops. Cut the white loop into.
One wire is a feed. Other is the switched fed.
Supply 12v or use as a ground switch.
Each has a 3a limit.
Alternatively. We have designed a harness to make them function as most expect. This harness plugs into them converting them to a switch led positive and a ground output to your accessory. Now you can just hook a accessory to it and turn it on.
store.hondasxs.com
Sent from my SM-G996U using Tapatalk
There just dead switches. There also not lit.
Blue tape under hood above second battery cubby. There you will find the dead end loops. Cut the white loop into.
One wire is a feed. Other is the switched fed.
Supply 12v or use as a ground switch.
Each has a 3a limit.
Alternatively. We have designed a harness to make them function as most expect. This harness plugs into them converting them to a switch led positive and a ground output to your accessory. Now you can just hook a accessory to it and turn it on.
Pioneer 1000, 3 switch, wire harness conversion.
New Product that transitions the factory switches found in the new 2022+ Pioneer 1000 deluxe models to work as you would expect. From the factory, these switches are dead, unconnected, and lacking. Honda provides no power or accessories to connect to these. They do NOT rely on or connect to the...
store.hondasxs.com
Sent from my SM-G996U using Tapatalk
Last edited:
Remington
POIDH Enforcement Officer
Lifetime Member
Supporting Member
Red500
Well-Known Member
Lifetime Member
Supporting Member
