2021 Takeover Swap

[JenElio]

I have a homemade bed extender for anyone that wants a simple rig. Made out of 3/4" EMT conduit pipe, nothing fancy but beats the PVC ones. Just sitting in my garage, free to anyone that wants it 👍

 

[Admin]

 

[Bad_bowtie]

*GONE*If anyone can use them I have a set of factory rear 1000-5 load leveling shocks. They have a small spacer lift installed in them as well. Free to a² good home, just let me know and I'll throw them in the truck before I head to takeover.

Thanks, these are now spoken for

 

[bucktaker]

I have a complete set of new P1K5 red plastics...wrapped in foam. $325 firm

****PENDING**** rear cage for P1k5 driver rear pipe is damaged from a rock in a rut but other wise its great shape with seat belts $250

PM or text if interested
Located in Dayton Ohio but could also meet at Takeover
937527749four

 

[Hondasxs]

I have a NEW FULL MAIN FRAME for a Pioneer 1000-3/5.
$900

 

[EMAW]

I have some SSS Off-road UHMW, REAR a-arm guards that I can’t use. These are new and come with the mounting hardware. I was told they should fit a 2015 thru 2017 Pioneer 1000. FREE

 

[Adam490]

I have some SSS Off-road UHMW, REAR a-arm guards that I can’t use. These are new and come with the mounting hardware. I was told they should fit a 2015 thru 2017 Pioneer 1000. FREEView attachment 269877

That's a great deal for someone. They'll fit any model year Pioneer 1000 with stock A-arms regardless of year ('16-'21)

 

[TimG]

I have some SSS Off-road UHMW, REAR a-arm guards that I can’t use. These are new and come with the mounting hardware. I was told they should fit a 2015 thru 2017 Pioneer 1000. FREEView attachment 269877

I'll take them please. What can I give you for them ?

 

[EMAW]

That's a great deal for someone. They'll fit any model year Pioneer 1000 with stock A-arms regardless of year ('16-'21)

The guards won’t fit my P1K , it has stock rear A-arms. I called SSS Off-road........they said these guards should fit the 2015-2017. I will bring these to the TO.

 

[Adam490]

The guards won’t fit my P1K , it has stock rear A-arms. I called SSS Off-road........they said these guards should fit the 2015-2017. I will bring these to the TO.

Not sure why they said that. Nothing has changed in the A-arms since the Pioneer came out in 2016.

 

[Bad_bowtie]

Got a set of 30x10-r14 Pit Bull Growlers XOR. I bought them for the rims they were mounted on because I already have new 30s but needed beadlocks. They are 8ply rated and from what I can tell seem to be a heavy built tough tire. $150

worst two

showing worst 1

 

[JNo323]

I have a set of P1K5 Deluxe take offs, around 1400 miles on tires and wheels do have some scuffs. I'll take $250 for the set and can bring to the Takeover. 3 of the 4 have slime in them from Coop and one of the rears has a boot and a plug. All hold air and do not leak down. Tread is around 70% left. (Sold @EMAW)

 

[TripleB]

Anyone got some 12 inch steel wheels for the pioneer 1000 that they wanna get rid of?

 

[talonwagon]

I have a set of factory tires from a 2020 Honda Talon 1000X4 that was taken off at the 600 mile mark. A couple of the wheels have a few scratches. No patches or slime in any of the tires. Asking $300 OBO. Can bring to the Takeover if interested.

 

[Ohio4x4]

I have a set of factory tires from a 2020 Honda Talon 1000X4 that was taken off at the 600 mile mark. A couple of the wheels have a few scratches. No patches or slime in any of the tires. Asking $300 OBO. Can bring to the Takeover if interested.

View attachment 272666 View attachment 272667 View attachment 272668 View attachment 272669

Is this just for the tires?

 

[talonwagon]

Is this just for the tires?

Wheels and tires.

 

[Ragnar406]

I have the following for Pioneer 1000-5

• AXLES (OEM axles are from new machine that dealer did a 6" lift on)
  • Rhino Axle Rear left 3-64-RL-0-DT $125
  • Honda OEM Rear left Axle $130
  • Rhino 2.0 Rear Right AX-3-64-RR-0-DT $150
• Highlifter Lift (Used) $100
• Front Right Hub (new) $50 comes with wheel bearings already installed
• Set of SATV ball Joints $50
• Tie Rod Ends
• Honda Upper Ball joints $15
• Honda lower Ball Joints $15
• Koplin console $60 - will clean up (magnetic mount does not come with)

View attachment 272329

 

[JenElio]

I have the following for Pioneer 1000-5

• AXLES (OEM axles are from new machine that dealer did a 6" lift on)
  • Rhino Axle Rear left 3-64-RL-0-DT $125
  • Honda OEM Rear left Axle $130
  • Rhino 2.0 Rear Right AX-3-64-RR-0-DT $150
• Highlifter Lift (Used) $100
• Front Right Hub (new) $50 comes with wheel bearings already installed
• Set of SATV ball Joints $50
• Tie Rod Ends
• Honda Upper Ball joints $15
• Honda lower Ball Joints $15
• Koplin console $60 - will clean up (magnetic mount does not come with)

View attachment 272329

You have a pic of the console?
How much do you want for the tie rod ends?

 

[Ragnar406]

You have a pic of the console?
How much do you want for the tie rod ends?

I will clean it up prior of course. lots of storage on the inside too.

 

[JNo323]

I have a Seizmik windshield for P1K I’ll take $300 for.

 

[JNo323]

Seismik half doors mounted on OEM Honda bottoms $500. Used one season.