1000r width trailer fitment

[NTCPrezJB]

Would it be just as easy to take the spacers on and off as it would be to swap tires and wheels every time you load it? Sounds like it does fit now without the spacers

Spacers mount between the rim and the hub. You’d have to pull the wheels to pull the spacers.

 

[Admin]

 

[NTCPrezJB]

Here ya go

P700 - Wooden Wheels. Turning Amish?

Hey all, Just thought I'd share this method for fitting your SXS in an enclosed trailer. I've got a 16' enclosed and my 700-4 has a roof and 27" tires. Needless to say it didn't fit in the trailer even with the tires aired down and the roof removed it still wouldn't fit. What I did was buy some...

hondasxs.com

That is one of my favorite threads on the forum. We had a lot of fun hijacking that one with nonsense

 

[Remington]

Would it be just as easy to take the spacers on and off as it would be to swap tires and wheels every time you load it? Sounds like it does fit now without the spacers

If its that tight, thats what i would do. Just get me a cordless impact to take withe me and bingo

 

[WagginTail]

Spacers mount between the rim and the hub. You’d have to pull the wheels to pull the spacers.

Correct. Someone suggested transport wheels and tires. So if the machine fits now with no spacers he could just remove the spacers to load it in the toy hauler. And just have the one set of tires and wheels. Or am I missing something? I don't have a talon or a toy hauler and it was a long day at work...🤷‍♂️

 

[WagginTail]

That is one of my favorite threads on the forum. We had a lot of fun hijacking that one with nonsense

Mine too. That's why when the opportunity presents itself I post it

 

[NTCPrezJB]

where can I find those?

A local metal shop could make you a set of discs that would work. Wrap them with bike inner tube if you need some extra traction. Honestly the wooden wheel deal would work too just make them out of 2x lumber or two sets of 1x lumber 90 degree offset to each other. It won’t be pretty or elegant but it’ll get the job done for you.

 

[NTCPrezJB]

Correct. Someone suggested transport wheels and tires. So if the machine fits now with no spacers he could just remove the spacers to load it in the toy hauler. And just have the one set of tires and wheels. Or am I missing something? I don't have a talon or a toy hauler and it was a long day at work...🤷‍♂️

Spacers on and off is more likely to lose one mid-trail. It’s usually recommended to locktite the spacers on because of that happening to people. I’m sure you could get away with it though.

 

[WagginTail]

Spacers on and off is more likely to lose one mid-trail. It’s usually recommended to locktite the spacers on because of that happening to people. I’m sure you could get away with it though.

Yea that makes sense

 

[WagginTail]

Spacers on and off is more likely to lose one mid-trail. It’s usually recommended to locktite the spacers on because of that happening to people. I’m sure you could get away with it though.

Never had issues with spacers on my Rincon. No locktite

 

[JenElio]

Can I jack up the sxs and strap the suspension from left to right to make the car narrower to fit in a enclosed trailer ? I need to make the car about 3-4 inches narrower. I want to add some rough country 1.5 spacers but the car barrely fits in the trailer as is.

Alright so first.......what part of FL you in?

Second...... I'd go to a Junk yard and get 4 doughnuts (the car type not the Homer simpson type) and drill out the needed bolt pattern. It might not end up dead on balanced but it would work more then well for what you need. That, or the wooden wheel way is actually possible just add some bicycle tires to the edge for traction.... 🤷‍♂️

 

[WagginTail]

A local metal shop could make you a set of discs that would work. Wrap them with bike inner tube if you need some extra traction. Honestly the wooden wheel deal would work too just make them out of 2x lumber or two sets of 1x lumber 90 degree offset to each other. It won’t be pretty or elegant but it’ll get the job done for you.

I would do the metal discs. Might could put some rubber on the ramp for traction

 

[JenElio]

Yea that makes sense

Never had issues with spacers on my Rincon. No locktite

Ohhh it happens!!! 😂😂😂

 

[NTCPrezJB]

Ohhh it happens!!! 😂😂😂
View attachment 318571

I wasn’t going to call ya out. Lol.

 

[JenElio]

I wasn’t going to call ya out. Lol.

Phucking RF bag phone virus spreading quick!!😂😂😂

 

[JenElio]

I wasn’t going to call ya out. Lol.

I've noticed if my phone screen goes dark mid downloading.....it's a 50/50 shot the pics go through 🤷‍♂️

 

[WagginTail]

Ohhh it happens!!! 😂😂😂
View attachment 318571

I might have forgot to tighten caliper bolts on my wife's 4 runner one time. Luckily she was making a turn only going about 10 mph when one came out. Stuff happens

 

[NTCPrezJB]

I might have forgot to tighten caliper bolts on my wife's 4 runner one time. Luckily she was making a turn only going about 10 mph when one came out. Stuff happens

I might have lost a lug nut on our Sienna once. Apparently counting all the way to five wasn’t my strong suit that day.

 

[JenElio]

I might have lost a lug nut on our Sienna once. Apparently counting all the way to five wasn’t my strong suit that day.

Having 5 lug nuts is good.......means you always have a spare.......or 2 😂😂

 

[CID]

Can I jack up the sxs and strap the suspension from left to right to make the car narrower to fit in a enclosed trailer ? I need to make the car about 3-4 inches narrower. I want to add some rough country 1.5 spacers but the car barrely fits in the trailer as is.

Ya know, this may very well work. Home Depot has 2" ratchet straps for <$9 each. There should be somewhere at both ends to run the strap in a loop, side to side. Jack it up, run/tighten strap, remove jack, short test drive for proof of concept.

 

[WagginTail]

Ya know, this may very well work. Home Depot has 2" ratchet straps for <$9 each. There should be somewhere at both ends to run the strap in a loop, side to side. Jack it up, run/tighten strap, remove jack, short test drive for proof of concept.

I am curious to know if this would work