List of tools required to complete this tasks:
- Flat Head Screw Driver or Fender Clip Removal Tool to remove the clips.
- 12 mm Socket for Engine & DCT drain plugs.
- 10mm Socket on 1/8" drive ratchet for filter covers.
- Honda recommends a Torque wrench.
- A Few Rags.
- Two Oil Catch Pans.
- Funnel with an extended tube to reach into the fill hole. I use a version of this funnel from Walmart, it lets you turn the flow on and off as well as measured calibrations on the side: FloTool Measu-Funnel, 7pc - Walmart.com