P1000 Yet another snorkle method

[Destinbeachman]

Worked on this tonight. Used pvc "spa" hose, from Ace Hardware, which is flexible and can be heated and flattened to whatever degree you need.
I'll post some pics tomorrow after I finish.

 

[Admin]

 

[Smitty335]

Worked on this tonight. Used pvc "spa" hose, from Ace Hardware, which is flexible and can be heated and flattened to whatever degree you need.
I'll post some pics tomorrow after I finish.

View attachment 37680

I really like your system

 

[Destinbeachman]

It seems like the most direct route under the seat and into the bed area, so should work fine.

 

[Destinbeachman]

Cost right around 50 bucks.

 

[joeymt33]

Cost right around 50 bucks.

View attachment 37711

What's the story with the bronco?

 

[Destinbeachman]

351W-C4-Kline V/Dana 20-4.88 ARBs-38s.

No story.

 

[sharp]

351W-C4-Kline V/Dana 20-4.88 ARBs-38s.

No story. View attachment 37712 View attachment 37715

That's awsome!

 

[popeye]

351W-C4-Kline V/Dana 20-4.88 ARBs-38s.

No story. View attachment 37712 View attachment 37715

Not much of a ford guy but those old broncos sure are pretty

Sent from my LGMS631 using Tapatalk

 

[joeymt33]

351W-C4-Kline V/Dana 20-4.88 ARBs-38s.

No story. View attachment 37712 View attachment 37715

Thanks for the pics. I just love those old Broncos. That's definitely a sweet one. Had one for a while and sold it. Stupid on my part.

Me and dad did all the work so it wasn't pristine but it was fun


Made this bumper from scrap


Looked like this when I brought it home. Paid $700!!!! And it drove pretty good.


Motor got a redneck rebuild


Blasted and repainted in our garage


I'd love to be able to afford another one. This dang pioneer is using up all available funds at the moment.

 

[Destinbeachman]

Thanks for the pics. I just love those old Broncos. That's definitely a sweet one. Had one for a while and sold it. Stupid on my part.

Me and dad did all the work so it wasn't pristine but it was fun


Made this bumper from scrap


Looked like this when I brought it home. Paid $700!!!! And it drove pretty good.


Motor got a redneck rebuild


Blasted and repainted in our garage


I'd love to be able to afford another one. This dang pioneer is using up all available funds at the moment.

Very cool. I have a project waiting for my son and I when he gets a few years older.

 

[CumminsPusher]

I like the snorkel design nice work. Nice bronco too! Love that body style

 

[Destinbeachman]

 

[Destinbeachman]

Went out this weekend and the snorkel works fine. Quite happy with it.

 

[Nipper]

Man....that is a clean looking snorkle. And I love the Bronco! If you find anymore for 700 ill take two!

Sent from my SAMSUNG-SM-G930A using Tapatalk

 

[trigger]

Nice! I bought a '68 Bronco back in the 80's as an off roader for $450. Doors were rotted off so the guy had plywood doors on it, the rest of the body pretty wasted too. Drive train was solid though, 289 w/3 speed on the column. Never registered it and just beat the hell out of it for 2 yrs. Then sold it for $500. Wish I would've kept it and I'm a Chevy guy.

 

[Kilo427]

351W-C4-Kline V/Dana 20-4.88 ARBs-38s.

No story. View attachment 37712 View attachment 37715

you got one of my dream vehicles that is nice!

 

[Torquemoto]

Worked on this tonight. Used pvc "spa" hose, from Ace Hardware, which is flexible and can be heated and flattened to whatever degree you need.
I'll post some pics tomorrow after I finish.

View attachment 37680

what size flex pipe did you use???

 

[sugarray]

Has this held up well?

 

[sugarray]

Is this 1.5"?

 

[GlockMeister]

Is this 1.5"?

It appears to be 2" to me. I have looked around local and that's the largest size I can find.