P500 Wiring sub harness

[Kirkl]

How do I get the red 12v car in my hand connected to the Honda wiring harness in the picture? It has goofy ends on it.

 

[Admin]

 

[William]

Cut the ends off and use an inline connector.

 

[Kirkl]

Cut the ends off and use an inline connector.

Thanks,So one cable is green and other white with black stripe. Which one hot and what ground?

 

[William]

Green should be hot. Mine was backwards! Don't know if it was the light bar wired wrong or the harness though. Use a volt tester.

 

[trigger]

Cut the ends off and use an inline connector.

Also called bullet connector...auto zone, radio shack.

 

[Kirkl]

Thanks everyone. Got it all hooked up and working. And yes white cable is hot lol. Learned it the hard way lol

 

[Montecresto]

How do I get the red 12v car in my hand connected to the Honda wiring harness in the picture? It has goofy ends on it.

View attachment 17287

The Honda wiring harness that I bought had four color coded leads. Only two of them had green ground wires.

 

[Kirkl]

The Honda wiring harness that I bought had four color coded leads. Only two of them had green ground wires.

That's what mine looked like. I guess you could ground to something else if ya needed to

 

[Montecresto]

That's what mine looked like. I guess you could ground to something else if ya needed to

Yep, I did. I installed a ground bar to run the multiple accessories off of.

 

[Rustell]

Yep, I did. I installed a ground bar to run the multiple accessories off of.

I did the same...it has come in handy.

 

[William]

White with a black stripe is hot, green is ground.

My bad!

 

[trigger]

I did the same...it has come in handy.View attachment 17322

I ran 4 gauge power and ground wires off of the battery through a bushing and into the bottom of the toolbox...stay dry.
I used a fused power bar (for car stereos) and ground bar mounted in box. All led's and winch run to those. Stereo and GPS go to the harness so they're switched power. Wanted some accessories to have ability to run regardless of ignition. Didn't want too much spaghetti under hood.
Accessories are easily added by running wires into bottom of toolbox. My 2 cents.