Wiring loom

[CrosbyTalon]

What does everyone use to cover accessory wires running along roll cage? I am tempted to try and route internally but don’t want to reduce cage integrity.

 

[Admin]

 

[Ohio4x4]

I use rubber fuel tube split with a knife for vulnerable wires where needed and other wise have good luck with this style https://www.amazon.com/Allstar-Performance-ALL76604-Spiral-Wire/dp/B00JQWA6DY#?tag=sxsweb24-20

 

[trigger]

Been using this stuff forever and you can get it at Auto Zone.

 

[CrosbyTalon]

Hmmm...I hate having a mess of wires visible and those looms I have seen but unless covered up I don’t care for them. 🤨

 

[LarryAmboy]

Try this

https://www.amazon.com/gp/aw/d/B07FW4M7Z8?tag=sxsweb24-20

Sent from my iPhone using Tapatalk

 

[Paul419]

I used this, it is a pain to get on the wire but looks great when done.

https://www.amazon.com/gp/product/B074GM1PK1/?tag=sxsweb24-20

 

[Djbunkerking]

I used both what Gaff and Paul posted.

 

[Montecresto]

I use rubber fuel tube split with a knife for vulnerable wires where needed and other wise have good luck with this style https://www.amazon.com/Allstar-Performance-ALL76604-Spiral-Wire/dp/B00JQWA6DY#?tag=sxsweb24-20

I love that idea, sounds like a pita to split, but man what a guard when you’re finished....😎

 

[Etzkorn22]

Check out Tesa Tape, it is what some auto manufactures use to wrap harnesses

 

[Ohio4x4]

I love that idea, sounds like a pita to split, but man what a guard when you’re finished....😎

It can be time consuming for sure. I started doing it with trailers in high chafing places. We also had issues with critters eating hanging wires and this seems to have stopped that also.

 

[Ragnar406]

What does everyone use to cover accessory wires running along roll cage? I am tempted to try and route internally but don’t want to reduce cage integrity.

View attachment 235668

I ended up using some black duct tape (same color as rops) to just tape a few wires to the bar as it ran up. That kept the wires flat against the bar and they were really unnoticeable a couple feet away

 

[Rednick69]

What does everyone use to cover accessory wires running along roll cage? I am tempted to try and route internally but don’t want to reduce cage integrity.

View attachment 235668

I only have 3 wires running up, 2 black and 1 red. I cut the ones I had to, spliced them back together, and slid them in shrink wrap then heated it.

 

[2021ArthurGuinnessX4LV]

I recently bought red wire loom to try my best to hide the wiring but I’m not 100% happy with the look. My cage is red is why I went with red loom, but the tones aren’t exact. I come from the Jeep world and lots of wiring can easily be hidden by the wrap on the roll cage, so I might try this product to see if it will make it look as if it was ment to be there. It’s neoprene and I believe it can be applied to fit snug on the 2” bar.