Windrock 12/14 & 12/15

JNo323

JNo323

Well-Known Member
Lifetime Member
Jan 3, 2019
178
1,109
93
Middle, TN
Ownership

  1. 1000-5

  2. Talon R LV
My junk is trashed nasty, pre-filter has mud all in it, stand by and I hope it didn't go throughView attachment 453459View attachment 453460

this is why I REALLY REGRET not allreafy having rock blocks
View attachment 453461
Might try this with that filter if RokBlokz don't stop it. 10-80 makes this also.
1734370848369
 
Jason W

Jason W

The Ginger Cracker
Lifetime Member
Supporting Member
Mar 17, 2024
1,281
10,777
113
Western NC mtns, Marion
Ownership

  1. Talon X LV
Might try this with that filter if RokBlokz don't stop it. 10-80 makes this also.
View attachment 453465
Well dang, I didn't see it when I orderd, the filter did fail @highpocket74 I'm gonna say it was my fault, the main filter was nasty, was a little water in filter box. So all who read, take advice, the 10 80 filter can't handle mud piled on it 😅

@JayPo @JNo323 @Coeus better check your primary filter
 
advertisement
highpocket74

highpocket74

Well-Known Member
Vendor
Lifetime Member
Jul 2, 2019
2,157
7,126
113
Kinder, Louisiana
www.10-80dirtsports.com
Ownership

  1. Other Brand

  2. Talon X
Well dang, I didn't see it when I orderd, the filter did fail @highpocket74 I'm gonna say it was my fault, the main filter was nasty, was a little water in filter box. So all who read, take advice, the 10 80 filter can't handle mud piled on it 😅

@JayPo @JNo323 @Coeus better check your primary filter
I know the Filterwears prefilter cover can handle rain because I've ridden in terrible downpours with it. Mud pie coating is different. I have mudbuster fenders on the rear only on my machine and they work well.
 
JNo323

JNo323

Well-Known Member
Lifetime Member
Jan 3, 2019
178
1,109
93
Middle, TN
Ownership

  1. 1000-5

  2. Talon R LV
Same, keep me updated, that's what freezes me feet
So here's what I did, used pipe foam and filled all the holes. Wrapped the spring with 1" pipe wrap, 1/2" wrap on the brake light switch spring and cut a small piece rolled up and crammed down inside the spring. I'd say I'm 98% blocked now around the brake pedal and gas pedal. We'll see how long it lasts.
Here's what it looked like before:
IMG 9236


And here's what it looks like after:
IMG 9237
IMG 9238
IMG 9239