Wheel Spacers

[Herkloader1]

I just got a great deal on some 32/10/15 Tusk Terrabites.
I am moving up from the same tire in a 30.
My rig is a 2022s X 4 with stock rims.
They left front tire barely rubs when at a full left turn.
The right front tire does not in either direction.
I was wondering if I could use a 1 in wheel spacers in the front to obtain the necessary clearance?
Would I need to also do a wider spacer on the rear tires?
In reading through the forums all I see is rear spacers.
Thanks for any insight you can provide.

 

[Admin]

 

[Hello_Darkness]

Most are running rear spacers to keep the track width even front and rear.

If one side is rubbing, then the rack isn't centered or the toe is off on one side.

 

[ChadD]

or the toe is off on one side.

kinda like @Scoop

#NTC

 

[JenElio]

kinda like @Scoop

#NTC

 

[Jankyeye]

When I installed 30/10/15s on 5+2 wheels the driver side rubbed more than the passenger for sure. I added 1" spacers to the front and 1.5 to the rear and it reduced the rubbing. I just removed the 1" spacers (to fit in the the toy hauler) and installed SATV steering stops that prevented the rubbing all together.

this is on satv atlas pro A arms..

 

[moonsase]

I just got a great deal on some 32/10/15 Tusk Terrabites.
I am moving up from the same tire in a 30.
My rig is a 2022s X 4 with stock rims.
They left front tire barely rubs when at a full left turn.
The right front tire does not in either direction.
I was wondering if I could use a 1 in wheel spacers in the front to obtain the necessary clearance?
Would I need to also do a wider spacer on the rear tires?
In reading through the forums all I see is rear spacers.
Thanks for any insight you can provide.

i run 4 rear wheels & use a spacer in rear to track right i believe they are 1.5 Inches, also have wheel adaptors to go from honda 137 bolt pattern to polaris rzr 156 my rzr wheels were studed 1inch front 2.5 Rear