P500 Wheel spacer question

D

DaveinWV

Active Member
May 24, 2024
34
123
33
WV
Ownership

  1. 520
Are offset rims easier on wheel bearings than spacers? I'm thinking of 1" spacers or rims with a +3 offset for the rear. I realize spacers would be less expensive.
 
  • Like
Reactions: pappyo
NTCPrezJB

NTCPrezJB

President of #NTC
Lifetime Member
Supporting Member
Jan 30, 2018
108,663
958,582
113
Canton, OH
Ownership

  1. 1000-5
Are offset rims easier on wheel bearings than spacers? I'm thinking of 1" spacers or rims with a +3 offset for the rear. I realize spacers would be less expensive.
Likely less overall rotational mass so probably a little better but the actual leverage factor (all things being equal in overall width) is the same.

My uneducated opinion but I’m curious to see what peeps smarter than I have to say.

For sure making sure lugnuts and spacer nuts are tight helps prevent issues on the trail. Nomojic
 
Mopower58

Mopower58

CST is the Best!
Lifetime Member
Supporting Member
Aug 10, 2017
79,609
707,458
113
Crystal Springs,Ms.
Ownership

  1. 1000-3
Are offset rims easier on wheel bearings than spacers? I'm thinking of 1" spacers or rims with a +3 offset for the rear. I realize spacers would be less expensive.
I would think the difference in offset wheels vs a spacer would be negligible as far as bearing load. If you use spacers I would recommend @RB3offroad and use loc-tIte on the spacer retaining nuts and a torque wrench.
 
JayPo

JayPo

Somewhat Well-Known Member
Lifetime Member
Aug 15, 2020
14,259
134,917
113
Tennessee
Ownership

  1. Other Brand

  2. Talon R
Pfffft. All this talk about checking lugnuts, using loctite, and quality spacers is overrated 🤣

20240127 143443


Actually I did check lugnuts and used loctite. I think the problem was crappy spacers. 🤦‍♂️ I've now upgraded to @RB3offroad spacers 👍
 
KyGal83

KyGal83

KGB, SNS, Duchess Sheldon, Ms. Daisy, Natasha
Lifetime Member
Feb 3, 2021
8,886
87,854
113
Kentucky
Ownership

  1. 500
Pfffft. All this talk about checking lugnuts, using loctite, and quality spacers is overrated 🤣

View attachment 431958

Actually I did check lugnuts and used loctite. I think the problem was crappy spacers. 🤦‍♂️ I've now upgraded to @RB3offroad spacers 👍
It was this exact moment... Wobbles was born.
 
P

pappyo

Well-Known Member
Dec 19, 2013
597
2,400
93
How to Keep your Nuts --Exposed & Tight -- using Spacers.

4on110 to 4on137 -- 1inch Spacers -- ( Can Am Beadlock wheels )

Can Am guys always doing upgrades pickup these for $200/300 set of 4 on facebook -- Craigslist .

Pictures are on 2022--P520 -- ITP 27X12's XTP Tires
54/54-1/2 Wide
20240607 203230 20240607 203234
 
Last edited:

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!