P500 Wheel Spacer Lugs

[William]

How tight should the lugs on the 1.5" wheel spacers be? I don't have a torque wrench. I used locktite and tightened them as hard as I could with a 3/8 ratchet. I like to think I'm purty strong...

 

[Admin]

 

[trigger]

How tight should the lugs on the 1.5" wheel spacers be? I don't have a torque wrench. I used locktite and tightened them as hard as I could with a 3/8 ratchet. I like to think I'm purty strong...

That's all I did William. Hit them with red thread locker and put a good amount of ass on each one of them. Good to go.

 

[KYhillbilly]

I did the same thing, wouldn't think they should come loose any easier than a normal lug nut and I just do the same for them.

 

[HUCK]

Don't know about strong but your sure PURTY . lol

 

[William]

Don't know about strong but your sure PURTY . lol

LOL...

 

[Bad_bowtie]

I just used red loctite and all I could get on them with a 1/2" ratchet. I've only rode it a couple miles since, but don't expect to have any trouble.

 

[trigger]

I just used red loctite and all I could get on them with a 1/2" ratchet. I've only rode it a couple miles since, but don't expect to have any trouble.

I ran mine that way for about a year. Just recently installed after market wheels and took the spacers off. Had to use a persuader to get them to cut loose.

 

[HUCK]

I ran mine that way for about a year. Just recently installed after market wheels and took the spacers off. Had to use a persuader to get them to cut loose.

Ah heck , don't throw them ol spacers away . Sendem to me >