P500 wheel lug nut torque

[NitroxDiver]

What is the wheel lug torque? I just added spacers and was curious what the correct torque is. The spacers didn't come with any instructions. From what I can find 12mm studs are around 90 ft lbs I torqued them to 75 ft lbs because of the thread locker lubricating the treads.

 

[Admin]

 

[Hondasxs]

Book says 98 for OEM wheels.

 

[NitroxDiver]

Book says 98 for OEM wheels.

Thanks for the reply. Is that in the shop/repair manual or the owners manual?

 

[Hondasxs]

Same in both. 98

 

[AlR]

What is the wheel lug torque? I just added spacers and was curious what the correct torque is. The spacers didn't come with any instructions. From what I can find 12mm studs are around 90 ft lbs I torqued them to 75 ft lbs because of the thread locker lubricating the treads.

Ok... thread locker? Should I put loctite on the spacer nuts? If so... what color loctite?
Thanx! Al

 

[Buford]

Ok... thread locker? Should I put loctite on the spacer nuts? If so... what color loctite?
Thanx! Al

You may want to use blue threadlocker , as red is a little tough to break loose.

 

[NitroxDiver]

I used blue thread locker on my spacers.