P1000m3 Wheel and tire setup

[Marc1991]

Hey everyone! Hope all is well out there. I’m wandering what people are running? I currently have stock wheels with 26x9x12 in front and 26x11x12 in rear. I punctured a tire side wall big enough I had to stuff 4 plugs to get back to camp while riding on Indian ridge HMT. I want to get a new setup with a full spare. I was thinking of going same wheel and tire setup all around. I was looking at 12x7 or 14x7 with a 5+2 offset wheels with 27x9x12 or 28x10x14 tusk terrabites. I’m thinking going with the 14 inch wheels with a 10 in wide tire might cause some rubbing. I was also told if I went with 5+2 all around I would want to add 1” spacers in rear to keep same stock width. Anybody else have a similar setup that I’m describing? Thanks!

 

[Admin]

 

[Remington]

I’m wandering what people are running?

Are you sure you want to ask that? Its not too late! 😂
search search search…….

 

[K9Paco]

Here is my list with 1.5” RB3 rear spacers.





Sent from my iPhone using Tapatalk

 

[Marc1991]

Here is my list with 1.5” RB3 rear spacers.

View attachment 325857
View attachment 325858


Sent from my iPhone using

That’s awesome! I have the same setup in my cart just with the Unita bead locks. They ride nice? Any rub in front? I appreciate you posting that!

 

[K9Paco]

That’s awesome! I have the same setup in my cart just with the Unita bead locks. They ride nice? Any rub in front? I appreciate you posting that!

I’ve sold it and moved on to a Talon but I did have very little rub at full lock and full compression.


Sent from my iPhone using Tapatalk

 

[Marc1991]

Are you sure you want to ask that? Its not too late! 😂
search search search…….

Hey just wanting to hear other peoples storys, and similar situations. Seeing how others enjoy the setup.

 

[Marc1991]

I’ve sold it and moved on to a Talon but I did have very little rub at full lock and full compression.


Sent from my iPhone using Tapatalk

Oh okay! Well thanks for the response. Happy riding!

 

[K9Paco]

Here are my 30x10x15 Tusk Megabites on Unitas that’s waiting on my Talon to get out of the shop.

 

[K9Paco]

And I highly recommend the RB3 Off-road spacers. Probably need the 1.5”.


Sent from my iPhone using Tapatalk

 

[Remington]

Hey just wanting to hear other peoples storys, and similar situations. Seeing how others enjoy the setup.

Hay.. 😂 Its ok. Didnt mean to get u worked up! Lol. Theres just a million post on this And was just trying to save u from the bombardment of “fun” harassment and every tire set up under the sun Lol. Im taking it you tried the search and no results? As long as u dont ask what the max size u can run with no lift and stock shocks, you might be ok! Jk

But Ill play along.…
30x10x15 LT M/S on MSA Bead locks. achieved with aftermarket shocks with pre load (no lift for god sakes) SATV forward arched arms and RB3 spacers.
So whatever you choose to do, get ready to brake out the billfold🤣

 

[Marc1991]

Hay.. 😂 Its ok. Didnt mean to get u worked up! Lol. Theres just a million post on this And was just trying to save u from the bombardment of “fun” harassment and every tire set up under the sun Lol. Im taking it you tried the search and no results? As long as u dont ask what the max size u can run with no lift and stock shocks, you might be ok! Jk

But Ill play along.…
30x10x15 LT M/S on MSA Bead locks. achieved with aftermarket shocks with pre load (no lift for god sakes) SATV forward arched arms and RB3 spacers.
So whatever you choose to do, get ready to brake out the billfold🤣
View attachment 325892View attachment 325893View attachment 325891

😂 I’ve been on here long enough to know not to ask about biggest tire and wheel setup! That setup is awesome, really takes the machine to new heights! That flag decal on the doors is awesome!

 

[Marc1991]

Here are my 30x10x15 Tusk Megabites on Unitas that’s waiting on my Talon to get out of the shop.

View attachment 325890

Love the look of those Unitas! You plan on doing any road riding with those megabites? A buddy of mine has a talon and I mentioned those or the terrabites to him, he does a lot of road riding and wasn’t sure how they’d hold up.

 

[K9Paco]

Love the look of those Unitas! You plan on doing any road riding with those megabites? A buddy of mine has a talon and I mentioned those or the terrabites to him, he does a lot of road riding and wasn’t sure how they’d hold up.

I live in south Louisiana so I travel to trail ride. If there’s a road to get from trail to trail then I do but I prefer the trails. And my only outlet close to home is a mud park so these should help a little when I have to go.


Sent from my iPhone using Tapatalk

 

[WagginTail]

Here are my 30x10x15 Tusk Megabites on Unitas that’s waiting on my Talon to get out of the shop.

View attachment 325890

Looking good. I'm thinking about getting those wheels for my pioneer.

 

[Marc1991]

I live in south Louisiana so I travel to trail ride. If there’s a road to get from trail to trail then I do but I prefer the trails. And my only outlet close to home is a mud park so these should help a little when I have to go.


Sent from my iPhone using Tapatalk

Alright, he’s the same way in West virgina. Sometimes he will drive 100 miles on road to get to a different trail system.

 

[Robobrainiac]

@SuperATV 28 intimidators on 14" Vision 544 black beadlocks that the rings are painted orange. Matching spare to boot. Best setup ever!

 

[Marc1991]

@SuperATV 28 intimidators on 14" Vision 544 black beadlocks that the rings are painted orange. Matching spare to boot. Best setup ever!

View attachment 325939

That’s a hella nice machine you got there! You go with a 5+2 offset? Any rubbing issues?

 

[Robobrainiac]

That’s a hella nice machine you got there! You go with a 5+2 offset? Any rubbing issues?

I had slight rub on the front shock upper bolts. I put 1" spacers on front and 2" spacers on the rear and everything is good to go. I do have the forward arched front arms and bracket lift. Wheels are 14x7 5+2 with +38mm offset. I know some manufacturers 5+2 can have some variation. If I remember correctly these wheels measured are most like a 5.4+1.6

P1000m5 - The Robo Build

The Purchase: 07-16-20 Hello All! I don't think I have made an introduction yet. I have been on here for awhile now. My wife and I are from central MO. We recently purchased our first home on 20 acres almost a year ago. We have had a couple Honda 4 wheelers for maybe 4 years now and enjoyed the...

hondasxs.com

Skimming thru my build thread I don't think I ever posted my high lifter bracket lift :/

Post #30 is the high lifter arched arms.

Post #33 is the wheels and tires.

Post #44 is the most recent pictures as the machine currently sits.

 

[Robobrainiac]

That’s a hella nice machine you got there! You go with a 5+2 offset? Any rubbing issues?

My original plan was 30" intimidators but after seeing so many reviews on here of people losing some power with the diameter of 30s I went with the 28s. Everything currently clears. I feel as tho I have not lost any power with the 28s.

All of my components for the suspension is based on the dealer I purchased my machine from. I bought the extended warranty and was told if I used high lifter components my dealer would take care of my warranty work. I bought from a powersports dealer who is also a high lifter dealer. If I had more courage with the freedom of choice I would have chosen cfab arched forward arms with the lift built in.

 

[Marc1991]

I had slight rub on the front shock upper bolts. I put 1" spacers on front and 2" spacers on the rear and everything is good to go. I do have the forward arched front arms and bracket lift. Wheels are 14x7 5+2 with +38mm offset. I know some manufacturers 5+2 can have some variation. If I remember correctly these wheels measured are most like a 5.4+1.6

P1000m5 - The Robo Build

The Purchase: 07-16-20 Hello All! I don't think I have made an introduction yet. I have been on here for awhile now. My wife and I are from central MO. We recently purchased our first home on 20 acres almost a year ago. We have had a couple Honda 4 wheelers for maybe 4 years now and enjoyed the...

hondasxs.com

Skimming thru my build thread I don't think I ever posted my high lifter bracket lift :/

Post #30 is the high lifter arched arms.

Post #33 is the wheels and tires.

Post #44 is the most recent pictures as the machine currently sits.

Thanks for sharing! Il check out them posts. That’s one awesome looking machine.
Happy riding! 🤟