I trying to finish up a long standing task of wiring my LED aux and work lights. The bullet connectors I have and used in making the harnesses are too large for what is on the sub-harness. I need to order some more wire, so want to get these too.
I trying to finish up a long standing task of wiring my LED aux and work lights. The bullet connectors I have and used in making the harnesses are too large for what is on the sub-harness. I need to order some more wire, so want to get these too.
Amazon. Get shrink tape too for an air/water tight fit.I trying to finish up a long standing task of wiring my LED aux and work lights. The bullet connectors I have and used in making the harnesses are too large for what is on the sub-harness. I need to order some more wire, so want to get these too.
I'm glad you brought up this issue,I ordered the sub harness thru my Honda dealer and am going to pick it up Sat.,I am going to see if they have the plugins on hand or if they can get them in.I stopped at an auto-parts store on the way home. No bullet connectors that size. The ones on there have nice siliconized boots, same or similar to what I've seen on outboard motors. Better quality that what I have.
RS? While once found around every corner, including rural NY, not so much anymore. No problem ordering from amazon if knowing the right size. Worse case, I'll just cut off and install what I have.
I stopped at a different auto parts store on the way in to work and they had 4mm. I will let everyone know this evening if they fit or not.
The 4mm male I bought fits tight into the the sub-harness female, but the 4mm female is too loose in the sub-harness male connector. Maybe these are some special type?
I used the 4 mm in the harness I picked up today and they fit nice and snug in the female,didn't have to use the male end for what I was wiring.I ended up just compressing the 4mm female connectors, and seems to work. Finished the project up and all back together. The lights all work including the switch LEDs.