P1000 What did you use to secure the 2nd battery

[Spoof0ne]

hey guys. I am gathering my parts list for the 2nd battery install for my winch and have everything ready for when I finally get the 2016 1000-5 from the dealer and I haven’t noticed on the dual battery install posts what was used to secure the 2nd battery.

How did you secure it? Part links are appreciated

Thanks

 

[Admin]

 

[JTW]

Cambuckle strap

 

[BWAF]

I put foam top and bottom on mine machine to round studs drilled and tapped them top and bottom and made a strap to go over the top and bolted it to the bottom of the plastic I had room because u put another factory battery in there

hey guys. I am gathering my parts list for the 2nd battery install for my winch and have everything ready for when I finally get the 2016 1000-5 from the dealer and I haven’t noticed on the dual battery install posts what was used to secure the 2nd battery.

How did you secure it? Part links are appreciated

Thanks

Sent from my SM-G930U using Tapatalk

 

[Plumber32]

Heavy duty zip ties

 

[K9Paco]

Just Dremeled out a slit and used a cheap strap.

2 Pc 1 in. x 12 ft. Lashing Straps







Sent from my iPhone using Tapatalk

 

[JTW]

Just Dremeled out a slit and used a cheap strap.

2 Pc 1 in. x 12 ft. Lashing Straps


View attachment 85356




Sent from my iPhone using Tapatalk

Does yours capture the steel cross member on both sides of the battery?

 

[K9Paco]

Does yours capture the steel cross member on both sides of the battery?

Just the back one.


Sent from my iPhone using Tapatalk

 

[WhitJo]

threaded some 3/16" stainless rod 10-32 and bent a 90º at the end....

drilled into the plastic on each side at the bend...where it was the strongest

made a 1/8" aluminum strap and used stainless wing nuts

 

[SuperDutyJohn]

I bought the rubber mat that goes in a tool box to keep tools from sliding and wrapped the bottom 1/3 of the battery and tapped it to stay in place while I dropped it back in the hole. it was very tight and just hit the bottom. I'm going to have a hell of a time when I have to take it out.

 

[GlockMeister]

threaded some 3/16" stainless rod 10-32 and bent a 90º at the end....
View attachment 85373
drilled into the plastic on each side at the bend...where it was the strongest
View attachment 85374
made a 1/8" aluminum strap and used stainless wing nuts
View attachment 85375

Did this on mine..it worked good but i didnt remember where i saw it. Thanks for the ideer..

 

[Spoof0ne]

So I have finally had time to work on the winch and add this 2nd battery.

Thanks to everyone for the suggestions. Here’s what I ultimately did:

Dremelled 2 slits in the bottom of the tray to pass a strap thru a lashing strap
2x Lashing Straps with Buckle... https://www.amazon.com/dp/B07G9488FD?tag=sxsweb24-20

Then I added self adhesive foam padding to make up the small gap so the battery fits snuggly. Foam Padding, Self Stick Adhesive... https://www.amazon.com/dp/B06ZY83SZJ?tag=sxsweb24-20

 

[Choped5er]

I just drilled 4 holes through plastic and put 2 big a** zip ties around it lol was meant to be a quick solution so I could go ride that night, has been like that almsot 2 years lol


Sent from my iPhone using Tapatalk

 

[RedFred1]

Not one damn thing... just a thin white packing foam wrap around the battery.

The wires hold it in place... even when my daughter rolled it... the battery did not move.

FredD

 

[TheHoover]

Hose clamp. Got the idea from someone on here. I put some foam strips on bottom. Cut two slits in bottom of battery case. Got a 32” clamp I believe and cut to size. Nothing fancy. But easy fix.

 

[JTW]

So I have finally had time to work on the winch and add this 2nd battery.

Thanks to everyone for the suggestions. Here’s what I ultimately did:

Dremelled 2 slits in the bottom of the tray to pass a strap thru a lashing strap
2x Lashing Straps with Buckle... https://www.amazon.com/dp/B07G9488FD?tag=sxsweb24-20

Then I added self adhesive foam padding to make up the small gap so the battery fits snuggly. Foam Padding, Self Stick Adhesive... https://www.amazon.com/dp/B06ZY83SZJ?tag=sxsweb24-20

View attachment 117471 View attachment 117472 View attachment 117473 View attachment 117474

That’s basically what I did but I cut my slit above the crossmeber so the strap wraps around it too.

 

[Pmed489]

Foam inserts from a pelican case on side and bottom No top strap. Don't plan on rolling it over. Knock on Wood.

 

[JTW]

Foam inserts from a pelican case on side and bottom No top strap. Don't plan on rolling it over. Knock on Wood.

Lmao... put a strap around it!