P1000 Vent Tube Extensions???Are They Necessary???

[Honda1000-5]

Well the title sort of says it all---are vent tube extensions necessary? Anybody had problems without extensions or had problems from doing the extensions? Thanks.

 

[Admin]

 

[Hondasxs]

Ultimately. No.

But I highly recomend doing the fuel vent if nothing else. Might as well do the sub trans while your right there.

This one vent has caused so many problems even thos who "never ride water" and just ended up in a seat deep mud hole have had a issue of water intrusion.

Sent from my SM-G955U using Tapatalk

 

[DDDonkey]

I just vented to two mentioned above, I don't ride water and found that all the others where vented to just above the seat from the factory.

 

[Bayouownbeer]

Do the two fuel and sub trans at least. I have a kit if you want to do them all or I hook you up with just the two. To do them all takes about a hour. Nothing has to be removed. Simple install. Shoot me a email if a can help. [email protected]

 

[Kevdp4]

Get @Bayouownbeer 's kit and do it. Why take a chance?

 

[Honda1000-5]

Do the two fuel and sub trans at least. I have a kit if you want to do them all or I hook you up with just the two. To do them all takes about a hour. Nothing has to be removed. Simple install. Shoot me a email if a can help. [email protected]

Thanks, ordered a kit this am.

 

[Bayouownbeer]

Thanks, ordered a kit this am.

Ship out tommorow 2-3 day shipping thanks

 

[Chadwick1968]

Do the two fuel and sub trans at least. I have a kit if you want to do them all or I hook you up with just the two. To do them all takes about a hour. Nothing has to be removed. Simple install. Shoot me a email if a can help. [email protected]

I have a 2018 pioneer 1000 3 seater and would like to get a kit for the vent issue from you

 

[Bayouownbeer]

I have a 2018 pioneer 1000 3 seater and would like to get a kit for the vent issue from you

" The Original " Honda Pioneer 1000 Vent Extension Kit | eBay

 

[Justletmeridemyhonda]

" The Original " Honda Pioneer 1000 Vent Extension Kit | eBay

What is in this kit? Is it just fuel lines?

 

[joeycgoodwin]

Guys, it’s just basic windshield washer line and some T’s. You can get at any auto parts store. I re ran all of mine and it cost maybe $35.00. If you don’t mind the work, I say go for it.

Ran them to here on mine

 

[joeycgoodwin]

Guys, it’s just basic windshield washer line and some T’s. You can get at any auto parts store. I re ran all of mine and it cost maybe $35.00. If you don’t mind the work, I say go for it.

Ran them to here on mine

 

[Bayouownbeer]

What is in this kit? Is it just fuel lines?

Every thing needed to extend the 6 factory vents. Tubing , fitting, tie wraps.

 

[Quailguy]

Hey Y'all, I'm a new 1000-3 owner and just got my vent extension kit from Ross. I'll preface this with "I'm no mechanic". Following the included instructions for the fuel vent, it says to pull the tube out of the frame. If I'm looking at the correct hose (attached to the white plug on top of the tank?), I see it connects to a box in the center of the seat, not into the frame. Am I looking at the right hose?

 

[Gunslingertom]

Hey Y'all, I'm a new 1000-3 owner and just got my vent extension kit from Ross. I'll preface this with "I'm no mechanic". Following the included instructions for the fuel vent, it says to pull the tube out of the frame. If I'm looking at the correct hose (attached to the white plug on top of the tank?), I see it connects to a box in the center of the seat, not into the frame. Am I looking at the right hose?

The differential vents to the frame.

 

[Quailguy]

I’m talking about the fuel tank vent hose, not the differential.

 

[TripleB]

Hey Y'all, I'm a new 1000-3 owner and just got my vent extension kit from Ross. I'll preface this with "I'm no mechanic". Following the included instructions for the fuel vent, it says to pull the tube out of the frame. If I'm looking at the correct hose (attached to the white plug on top of the tank?), I see it connects to a box in the center of the seat, not into the frame. Am I looking at the right hose?

Mine is a 2018 1000-5. It was stuck into the frame on the backside of the seat.

 

[TripleB]

Hey Y'all, I'm a new 1000-3 owner and just got my vent extension kit from Ross. I'll preface this with "I'm no mechanic". Following the included instructions for the fuel vent, it says to pull the tube out of the frame. If I'm looking at the correct hose (attached to the white plug on top of the tank?), I see it connects to a box in the center of the seat, not into the frame. Am I looking at the right hose?

Is Ross, bayouownbeer? If so he has pictures on Facebook.

 

[Quailguy]

Ya, it's from Ross and I have his instructions. I'm just not seeing what he is describing. I've included 2 photo's (hopefully) showing the line leading away from the tank and where that hose goes into the box.

 

[Neohio]

Ya, it's from Ross and I have his instructions. I'm just not seeing what he is describing. I've included 2 photo's (hopefully) showing the line leading away from the tank and where that hose goes into the box.

View attachment 116521 View attachment 116522

You are in California, with a California model.
That is a fuel vapor recovery. It simply puts the vapors back into the intake tract. I would leave that alone in this case.