P700 Vent Lines

[LandPioneer]

I'm working on extending my vent lines on my P700-4. I found the front diff, rear diff, fan (if it is clear LOL), and fuel. I can't seam to locate sub trans. Anybody got any pointers? I found instructions for the 1000 but not the 700. Am I missing anything?

 

[Admin]

 

[Hondasxs]

I'm working on extending my vent lines on my P700-4. I found the front diff, rear diff, fan (if it is clear LOL), and fuel. I can't seam to locate sub trans. Anybody got any pointers? I found instructions for the 1000 but not the 700. Am I missing anything?

That's because the 700 does not have a separate sub trans vent. the sub trans is built into the crankcase on this unit.
Thanks.

 

[LandPioneer]

That's because the 700 does not have a separate sub trans vent. the sub trans is built into the crankcase on this unit.
Thanks.

Ok got ya thanks! So I should have everything I need vented?

 

[Tflynn]

Sounds like you got it all covered. How did the snorkel come out?

 

[LandPioneer]

Sounds like you got it all covered. How did the snorkel come out?

Unfortunately I haven't had time to make it yet. I was already at the auto store the other day so I picked up some vent lines. Hopefully within the next week I can make it to Lowes to get the material. I figured I'd go ahead and knock out the vent lines so all I'll have left is configuring the snorkel.

 

[SuperYeti]

What are you planning on making your snorkel out of?

 

[LandPioneer]

What are you planning on making your snorkel out of?

2" PVC pipe with 45 and 90 degree elbows.

 

[Tflynn]

Unfortunately I haven't had time to make it yet. I was already at the auto store the other day so I picked up some vent lines. Hopefully within the next week I can make it to Lowes to get the material. I figured I'd go ahead and knock out the vent lines so all I'll have left is configuring the snorkel.

Oh ok I thought you were going to run the vent lines into the snorkel. Post pics when it's done.

Oh and some people extend the overflow tube for the radiator so it doesn't suck foreign water into the cooling system. I don't know if I would go that far but some do.

 

[LandPioneer]

Oh ok I thought you were going to run the vent lines into the snorkel. Post pics when it's done.

Oh and some people extend the overflow tube for the radiator so it doesn't suck foreign water into the cooling system. I don't know if I would go that far but some do.

Nah I'm just running them about eye level while seated. I honestly don't plan on ever running in water over the seat. I'm doing it more as a precautionary thing. Yes sir I'll definitely post up some pics when I get it finished.

 

[Dragon21]

do you recall the tubing size for the vent lines? Also curious where you ran them.

 

[LandPioneer]

do you recall the tubing size for the vent lines? Also curious where you ran them.

Pretty sure the size was 7/16". I put some little mower fuel filters on the end to keep junk out. I then zip tied them inside the metal triangle that holds the factory seat belt.

 

[Gator]

Pretty sure the size was 7/16". I put some little mower fuel filters on the end to keep junk out. I then zip tied them inside the metal triangle that holds the factory seat belt.

7/16"?

 

[Dragon21]

7/16 or 7/32? I think i saw somewhere about using windshield washer fluid tubing

 

[LandPioneer]

7/16 or 7/32? I think i saw somewhere about using windshield washer fluid tubing

Sorry I do think it was 7/32". I took a piece in to Autozone and got as close as I could.

 

[LandPioneer]

Multi - Fuel tank breather hose - IMPORTANT modification for ALL!