P500 UTV Gun Mount for Honda Pioneer 500

[HaggyGP]

My dad and I managed to install my Amazon delivery been waiting for... Kolpin UTV Gun Mount [HASHTAG]#20073[/HASHTAG]

The Gun mount is about 15% to large... so... made one slight modification. Thanks to Tony at Star Fabricating, he was able to bend one side of the floor bracket in the big steel brake to match up with the hump in the floor, allowing us to offset the mount. We need to access the Parking brake, and have enough room for big hunting boots. It was a success. In fact we think it will be much stronger, less wobbly being bolted at two different points on the floor, giving us strength from all angles. I am 6'3" and 250 lbs, and have lots of elbow & leg room with both dad and I sitting.

 

[Admin]

 

[1border4manu]

I decided I wanted something outside the cab. It is made by Strongmade. But i think that should workout well for you. Thanks for sharing.

 

[HaggyGP]

View attachment 152192 View attachment 152193 View attachment 152194 I decided I wanted something outside the cab. It is made by Strongmade. But i think that should workout well for you. Thanks for sharing.

Hey nice job, I like what you have installed. I was only worried about keeping the guns out of the elements. If I find the tree to awkward, I may do what you have done. Looks great on your machine!

 

[1border4manu]

Hey nice job, I like what you have installed. I was only worried about keeping the guns out of the elements. If I find the tree to awkward, I may do what you have done. Looks great on your machine!

Thnak you, I use it mainly at the sporting clay course. It is made by Strongmade.

 

[KyleBeyea]

Gun Grabber makes a nice rack. You can also get parts to build your own if theirs doesn’t work for you.

 

[Woody8692]

My dad and I managed to install my Amazon delivery been waiting for... Kolpin UTV Gun Mount [HASHTAG]#20073[/HASHTAG]

The Gun mount is about 15% to large... so... made one slight modification. Thanks to Tony at Star Fabricating, he was able to bend one side of the floor bracket in the big steel brake to match up with the hump in the floor, allowing us to offset the mount. We need to access the Parking brake, and have enough room for big hunting boots. It was a success. In fact we think it will be much stronger, less wobbly being bolted at two different points on the floor, giving us strength from all angles. I am 6'3" and 250 lbs, and have lots of elbow & leg room with both dad and I sitting. View attachment 151986 View attachment 151987 View attachment 151988 View attachment 151989 View attachment 151990

Going to install this setup in my pioneer 520 and was just wondering if you used bolts and nuts to mount in the 4 holes or did you use self tappers. Also was it difficult to get at the nuts from underneath the machine. Thanks

 

[Remington]

Going to install this setup in my pioneer 520 and was just wondering if you used bolts and nuts to mount in the 4 holes or did you use self tappers. Also was it difficult to get at the nuts from underneath the machine. Thanks

Would be nice to know wouldn't it?
Sad thing if u look at his profile and the thread date, the thread is from 2019 and he was last on the forum 2-1/2 years ago.
Might want to send him a PM and he might get an email and respond back to you.
Most likely looks like yoyr gonna have to experiment with the mounting yourself tho