P1000 Tire Pressure

[Honda1000-5]

Just bought Maxxis Carnivores 28x10-14. I always inflated the OEM Big Horn 2-0's to 14lb rear and 13lb front as per the Honda Manual, what are others doing???

 

[Admin]

 

[TripleB]

Just bought Maxxis Carnivores 28x10-15. I always inflated the OEM Big Horn 2-0's to 14lb rear and 13lb front as per the Honda Manual, what are others doing???

I run 10 psi in my 28x10x12 blackwater evos. I also ran 10psi in my stock Blackstones.

 

[Smitty335]

I run 10 psi in my 28x10x12 blackwater evos. I also ran 10psi in my stock Blackstones.

10 for me on my 30 Terra Hooks

 

[Isaiah]

10 psi in my 30in EFX motoclaw

 

[AZRocks]

10 psi in 28" STI Chicanes. The OEM Bighorn 2.0s are 4 ply and need the recommended 13 front, 14 rear psi to reduce flex. Note that retail BH 2.0s are 6 ply and not a bad tire for traction.

 

[Honda1000-5]

10 psi in 28" STI Chicanes. The OEM Bighorn 2.0s are 4 ply and need the recommended 13 front, 14 rear psi to reduce flex. Note that retail BH 2.0s are 6 ply and not a bad tire for traction.

Thank you, too bad Honda has Maxxis cheapen the OEM's, I got rid of them at 1700 miles because I've seen too many folks have punctures.

 

[t-bear]

13 psi on Tensor Regulators but I run a lot of gravel/rock roads and pavement at 30ish mph. Good compromise for that tire.

 

[Honda1000-5]

13 psi on Tensor Regulators but I run a lot of gravel/rock roads and pavement at 30ish mph. Good compromise for that tire.

My riding is similar, thanks.

 

[Amre2me2]

8 psi on Ripsaws and beadlocks. Rough Rocky snow covered trails and cross country.

 

[nitzo]

10 in my 28 x 10 x 12 Berserkers. Deep sandy trails mostly.