IMG_2021.JPG

Tinker

Tinker
amc019

amc019

Well-Known Member
Lifetime Member
Jan 23, 2016
480
592
93
Little Rock, Ar
Ownership

  1. 1000-5
The bendable hose through the hood compartment and up through the cup holder looks like the way to go. Interested to see how it turns out from there.
 
F

Fullthrottle

Active Member
Oct 5, 2015
164
84
28
Passengers gonna be choked taking away their bevy holder.
 
  • Like
Reactions: MNnice
Up2It

Up2It

Member
Jan 9, 2016
93
64
18
Calgary Alberta
Messed around a little last night with how to make a battery holder downer, I have some of these connectors that are used to hold body panels on pretty much just insert and a half twist an it locks the connector. I just cut a slight hole for it to slide into the back side of the plastic a couple O rivets. The metal brace was just pieces of metal left over from a different project I will prob bend it all on piece instead of the welds later but overall for a prototype works well so far.

View attachment 9890 View attachment 9891 View attachment 9892 View attachment 9893
Nice use of Dzus fasteners!
 
Hometeam

Hometeam

Well-Known Member
Lifetime Member
Nov 26, 2015
976
4,008
93
Normal, IL
Great idea on the battery fastener! I have the same battery and was just looking at it last night trying to decide how to secure it.
 
joeymt33

joeymt33

i4WD=imitated 4WD
Moderator
Lifetime Member
Supporting Member
Club Contributor
Mar 17, 2015
11,096
39,129
113
Guntersville, AL
Ownership

  1. 1000-3

  2. 1000-5
Looks real good!
 
  • Like
Reactions: pct
Kilo427

Kilo427

Not about the destination Its about the journey
Lifetime Member
Dec 10, 2015
1,543
6,440
113
Got a parking brake done tonight temporarily but it will work. Explanation when I'm not at shop to come.
 
Kilo427

Kilo427

Not about the destination Its about the journey
Lifetime Member
Dec 10, 2015
1,543
6,440
113
Less than 1 amp it's not a long term solution you could do the same with a manual lock but you would need to run the lines up to dash, which I may do. But then again I don't really trailer the rig many places. I am going to use this switch with a lock for the time being and see how it works.

CONTURA V, LOCKING ROCKER WITH SINGLE DAYLIGHT BRIGHT RED LED, LOWER INDEPENDENT LED ONLY

And no I don't plan on keeping those crappy compression fittings I did order the correct lines just hard to find a 1/8 npt to 10mm brake line adapter around here so it's just kinda of a test.
 
  • Like
Reactions: CashMoney
advertisement
CashMoney

CashMoney

Active Member
Feb 5, 2016
329
211
43
Reno, NV
www.SRTNV.com
I'm lucky, summit racing is a block away from my shop. I'm thinking about doing an electric line lock too, I just know though I'd forget and leave it on. Glad to see you're trying it.
 
CumminsPusher

CumminsPusher

Just a Honda doing Honda things.
Lifetime Member
Supporting Member
Club Contributor
Oct 14, 2015
42,064
322,689
113
Washington/Idaho
Ownership

  1. Other Brand

  2. 1000-5

  3. Talon X LV
Up this week in the build list before takeover

A arms (if they come in)
Lift (if A arms don't come in)
Radio
Finish switch panel
Finish wiring
Change IGR main drive gear
Finish soft top
Door bags
Mirror
Uninstall bellows and run vent hoses
Cab light

Oh and build some wheel well armor so my twig and berries are safe

So not much.... if I don't sleep lol

So not just igr! ... it's the final countdown.


Sent from my iPhone using Tapatalk
 
E

elkguide

Well-Known Member
Lifetime Member
Supporting Member
Mar 14, 2017
3,377
7,964
113
Vermont
Ownership

  1. 1000-3
Up this week in the build list before takeover

A arms (if they come in)
Lift (if A arms don't come in)
Radio
Finish switch panel
Finish wiring
Change IGR main drive gear
Finish soft top
Door bags
Mirror
Uninstall bellows and run vent hoses
Cab light

Oh and build some wheel well armor so my twig and berries are safe

So not much.... if I don't sleep lol


Don't forget that we "NEED" pictures as you go!!!!!
 
GlockMeister

GlockMeister

The Bearded Wonder
Lifetime Member
Supporting Member
May 11, 2016
7,606
35,593
113
Greenville, Mo
Ownership

  1. 1000-5
Haven't been to sleep yet but I finally got wiring all tucked away, radio finished, switch panel done. Those mini 4200 Phoenix make wiring fairly easy some of the switches are hooked to a relay in that sealed fuse box depending on voltage. Got a red dome light wired up as well.

Also finished running all vent hoses and took off the bellows so as not to blow a seal. Although I didn't take the bellows off the fan not sure that really matter on that line.

Next up: tear it completely apart remove heat and Sound shielding that I Fabricated and replace IGR gears. I just hope A arms come in before go time I really want these damn tires to stop mocking me

View attachment 40561 View attachment 40562 View attachment 40563 View attachment 40564 View attachment 40566
Looks good man!
 
CumminsPusher

CumminsPusher

Just a Honda doing Honda things.
Lifetime Member
Supporting Member
Club Contributor
Oct 14, 2015
42,064
322,689
113
Washington/Idaho
Ownership

  1. Other Brand

  2. 1000-5

  3. Talon X LV
Haven't been to sleep yet but I finally got wiring all tucked away, radio finished, switch panel done. Those mini 4200 Phoenix make wiring fairly easy some of the switches are hooked to a relay in that sealed fuse box depending on voltage. Got a red dome light wired up as well.

Also finished running all vent hoses and took off the bellows so as not to blow a seal. Although I didn't take the bellows off the fan not sure that really matter on that line.

Next up: tear it completely apart remove heat and Sound shielding that I Fabricated and replace IGR gears. I just hope A arms come in before go time I really want these damn tires to stop mocking me

View attachment 40561 View attachment 40562 View attachment 40563 View attachment 40564 View attachment 40566
Kicking ass. Funny about those wheels ya no s*** I'd want them on too they look good!
 
  • Like
Reactions: pct and sharp
ohanacreek

ohanacreek

My EcoBoost has I4WD
Moderator
Lifetime Member
Jul 25, 2013
11,346
32,049
113
Shelby County, Alabama
Ownership

  1. 1000-5
I looked at the Full size Feniex 4200 but I already had all the switches from my 700. I REALLY liked the 4200 minis but since I already had 200$ in switches It was hard to justify them.
 
E

elkguide

Well-Known Member
Lifetime Member
Supporting Member
Mar 14, 2017
3,377
7,964
113
Vermont
Ownership

  1. 1000-3
Those switches really do make it!!!!
 
E

elkguide

Well-Known Member
Lifetime Member
Supporting Member
Mar 14, 2017
3,377
7,964
113
Vermont
Ownership

  1. 1000-3
Creativity can be fun...... or maybe funny!
 
  • Like
Reactions: CumminsPusher
advertisement