Talon X- 14" wheel question

[McCarthy]

Guys, i've heard it talked about here and there and nobody seemed to have a definitive answer if 14" wheels will fit on a Talon X?

I want to run 29x11x14 and 29x9x14. I don't want 30s or 32s as I want to retain factory ish power, but I want 14's to get an extra inch of sidewall, which will help with the brutally stiff ride.

 

[Admin]

 

[Junkyard]

The system 3 14” wheels fit on my x-4. Ran it in the dunes and all seems good. I think the R has less clearance from what I’ve read.

 

[HUCK]

Cheaper to have Weller Racing do your shocks . Then you will have smooth ride with any size tires .

 

[PaulF]

Cheaper to have Weller Racing do your shocks . Then you will have smooth ride with any size tires .

+1 for Weller Racing. They did a tremendous job on my R.

I run 14" wheels on my R with my paddles but I had to cut down the nubs on the front upper control arms. You should NOT have that problem on an X.

 

[PaulF]

See this post for more info...

Talon - STI HD9 Wheels

for those looking at 14" STI Hd9 wheels, I have them installed now with 30" Maxxis Liberties. I am 69" wide from & with 1.5" spacers I am 69" in rear. The inside of the front wheels is very close to the Brake rotors. I may build some 1/8" to 1/4" this spacers just add a little more clearance...

hondasxs.com

 

[TerryH]

I've been running 14" Raceline +10 offset on my X since day 1. Never had any sort of issue at all.

 

[Sheetmetalfab]

Yep 14’s on my X4 since October 2019 no problems.

 

[Elkhunter]

Cheaper to have Weller Racing do your shocks . Then you will have smooth ride with any size tires .

What exactly do they do with the stock fox shocks? Do they install different springs too?


Sent from my iPhone using Tapatalk

 

[Lil_Steve]

What exactly do they do with the stock fox shocks? Do they install different springs too?


Sent from my iPhone using Tapatalk

They have a few options... A-Arms, Spindles, Steering Racks, Tie Rods