Talon 1000X-4 Accessory wire in the rear

[reastman]

I apologize if this is already answered (I did try searching), but I am new to owning a Honda Talon. I plan on adding a sound bar this weekend, and I am trying to do some pre-planning on the wiring. After removing the dash I have located the accessory harness in the front. The challenge is that I need to connect this to the accessory wire on my sound bar, which I plan on mounting in the rear. Is there an accessory wire in the rear, or does anyone have any videos or information on the easiest way to route a wire from the front to somewhere in the rear (maybe near the battery) for a Talon 1000X-4?

 

[Admin]

 

[Vondy]

No accessory wire in rear that I am aware of. Best routing is thru the tunnel in between seats. There are other wires running thru there that It can be attached to.

Closest would likely be the rear seat lighter socket. You could get one of @Hondasxs wiring harnesses for a simple, no cutting, hookup. KEY ON POWER Harness for Honda Pioneer 1000, 700, 500, and Talon 1000.

 

[reastman]

Thanks. After some more research that appears to be what most people are doing. Removing the covers on the center tunnel and running along side the existing wires already from the rear.