P1000 Taking CFab lift out

[PawPaw]

So I’m wondering. I’m thinking of taking my cfab lift off and going back stock. So I have 30 x10x 14 carnivores on now. First of all what do y’all think and can I put 28’s on when I go back to stock suspension. I have a 2018 3 seater.

 

[Admin]

 

[Mark in Northern Iowa]

Probably, because that is what I run with stock suspension on my 2018 3 seater. 👍
BF Goodrich KM3 28x10x14 and ITP delta steel rims.
I've been told my ITP Delta wheel are 5/2 offset rims, I do not know for sure.
I do run a 1-1/2" spacer on the rear.
All 4 tires and rims are the same.
.

.

.
I have read that some owners rub at full compression and turning. I have never been, or plan to be, in that situation, so no problem for me.
.
Have a good day

 

[GovtMule]

I’ve got 28’s on mine and haven’t had any rub.

 

[PawPaw]

Thanks I already have 5-2 offset 14” rims.

 

[bumperm]

What made you decide to go back to stock suspension and 28's?

I'm still running stock.

 

[Remington]

So I’m wondering. I’m thinking of taking my cfab lift off and going back stock. So I have 30 x10x 14 carnivores on now. First of all what do y’all think and can I put 28’s on when I go back to stock suspension. I have a 2018 3 seater.

Is that Lift kit a bracket or full suspension?

 

[PawPaw]

I actually have the same exact rims.

 

[PawPaw]

What made you decide to go back to stock suspension and 28's?

I'm still running stock.

Getting old and don’t go on rides as much anymore. My Pioneer is over waist high at my tailgate. So loading a deer and other stuff is getting rough on me.

 

[PawPaw]

Is that Lift kit a bracket or full suspension?

It’s an an arm lift. It’s unique it’s built in with the forward and rear offset an arms. Built in Mississippi. It did what I needed it to. But now it’s more of a hunting and work rig. Hopefully it will smooth my ride out also.

 

[PawPaw]

Probably have it for sell and some 30” carnivores that are in good shape.

 

[Remington]

It’s an an arm lift. It’s unique it’s built in with the forward and rear offset an arms. Built in Mississippi. It did what I needed it to. But now it’s more of a hunting and work rig. Hopefully it will smooth my ride out also.

See ya’ll… proof the bracket lift is a rougher ride cuz they change the suspension geometry not to mention everything else in the drive system is off. I already knew this cuz I had one years ago for a while. Most folks go back to normal or a true suspension lift

 

[PawPaw]

It’s definitely rough on the front end.

 

[Remington]

It’s definitely rough on the front end.

Thats what she said!

 

[PawPaw]

Every time.

 

[bigshoe]

So I’m wondering. I’m thinking of taking my cfab lift off and going back stock. So I have 30 x10x 14 carnivores on now. First of all what do y’all think and can I put 28’s on when I go back to stock suspension. I have a 2018 3 seater.

28s carnivores on stock rims will rub for the first 500 miles on sharp turns and full compression. with 5+2 rims won't rub at all. im on 29-9-14 megabites with 5+2 rims only rub at full compression turning.

 

[Jas sxs]

So I’m wondering. I’m thinking of taking my cfab lift off and going back stock. So I have 30 x10x 14 carnivores on now. First of all what do y’all think and can I put 28’s on when I go back to stock suspension. I have a 2018 3 seater.

i am running 30 -10 - 14 carnivores on my 2021 1000-5 with no lift i have high lifer a arms + 2 on front , back is stock with no problems

 

[DirtyDusty]

Did you have to upgrade axles with the hilift ER a-arms?

 

[Mopower58]

So I’m wondering. I’m thinking of taking my cfab lift off and going back stock. So I have 30 x10x 14 carnivores on now. First of all what do y’all think and can I put 28’s on when I go back to stock suspension. I have a 2018 3 seater.

I've got BH II 28x9x14 on front and 28x11x14 on rear on 5+2 wheels and 1 inch spacers on rear. No rubbing at all.

 

[PawPaw]

Thanks

 

[Jas sxs]

Did you have to upgrade axles with the hilift ER a-arms?

no i have factory axle