P1000m5 Superatv flip

[bigr244]

Guys I'm installing the lower half of the superatv windshield right now. That's about as close as I can get the clamp. Am I doing something wrong?


Sent from my SM-G935V using Tapatalk

 

[Admin]

 

[G1Eagle]

Guys I'm installing the lower half of the superatv windshield right now. That's about as close as I can get the clamp. Am I doing something wrong?
View attachment 148191

Sent from my SM-G935V using Tapatalk

Mine came in yesterday but I haven’t tried to install. Did you figure it out?

 

[JTW]

Smack that f***er with a BF hammer!

 

[bigr244]

Adding a friend to squeeze the clamps worked! I did have to pop the roof up to get the top mounts in. Very please with the quality so far. Tightened all the bolts and no rattles.
For those that have installed this with one person, my hats off to ya!

Sent from my SM-G935V using Tapatalk

 

[G1Eagle]

I installed mine yesterday afternoon. I did it by myself with a little help from my 8 year old. I think what helped me was removing the top ROPS brackets from the windshield and mounting them loosely to the ROPS first. With no windshield attached they slide right into place. I then put the top portion of the windshield on and attached the side brackets loosely first then reattached the windshield to the top brackets. Also, I loosened most of the other adjustment points ahead of time. I was able to align things and then tighten everything up.

I didn’t have any problems with the lower windshield. Based on bigr244’s post above, I was expecting a problem but it went on fine. Not sure why he had trouble and I didn’t. Usually if anybody has trouble like that it’s me. Guess I was lucky this time.