K
Nevermind, i will just see what the directions say. Thanks
Honda Pioneer - Street Legal Turn Signal Lights Horn Kit SxS 500 700 1000 1000-4
Honda Pioneer - Street Legal Turn Signal Lights Horn Kit SxS 500 700 1000 1000-4
Last edited:
I looked at that some time back. The issue is to make it all work you'll need to spend some time making up light mounting brackets and hardware. I decided it wasn't needed bad enough.
This is what I came up with ,$30.00 and 30 minutes, I don't know if it would meet the requirements of mandatory turn signals, but where I ride they aren't required on roadways I just put these on for added safety for myselfI emailed them and they said its easy to install. Im just gonna rig it up quick to make it work for certification then work on it later.
This is what I came up with ,$30.00 and 30 minutes, I don't know if it would meet the requirements of mandatory turn signals, but where I ride they aren't required on roadways I just put these on for added safety for myself View attachment 17162
These are the magnetic trailer lights everything fits in the ammo box when I take them off.
So are these things street legal anywhere in the US?
Ok, I guess that includes insurance. I'll see if I can check my states for that.No I dont think so. We have certain roads in WA state where we can ride them if they are street legal (mirrors, turn signals, horn, brake lights). We can dump out at a spot and go ride for hundreds of miles. Just pull into small towns and gas up and continue on.
Yes...you need to drill a small hole.. On the rear I have a running/brake light to the outside and a turn signal to the inside. Also, here in Washington a license plate light is required. You can see that mounted on my storage box. The front is just a turn signal. I took these pics while it was flashing. Took a couple of trys to get it right. I have two switches on the dash for the turn signals. I didn't want to mess with a colum mounted switch because of the paddle shifters. That little button in the upper left is for the horn.Rustell,
Did you drill into the plastic to mount those? I was hoping to stay away from that and rig something up. You have a picture of the front lights?
Yes...you need to drill a small hole.. On the rear I have a running/brake light to the outside and a turn signal to the inside. Also, here in Washington a license plate light is required. You can see that mounted on my storage box. The front is just a turn signal. I took these pics while it was flashing. Took a couple of trys to get it right. I have two switches on the dash for the turn signals. I didn't want to mess with a colum mounted switch because of the paddle shifters. That little button in the upper left is for the horn. View attachment 17194 View attachment 17195 View attachment 17196
I used the accesory harness ...quite handy.
For the tail lights and brake , I tapped into the rear factory tail light because I wanted the lights to work off the headlight switch.
I was somewhat intimidated at first... but once you get started it becomes quite easy.
I will wave when we pass thru Yakima on our way to Idaho in a few weeks..
I ran a wire along the frame rail underneath the skid plate.One more questions. Where did you run the harness from front to back?
Not sure what you guys use for this but I highly recommend EZturnsignals . Cisco has everything you need ,reasonably priced . I have bought street legal kits , turn signal kits and others . He sells led stuff so very low current draw and everything comes with step by step instructions and pictures . If you need more help he (Cisco , the owner) is available by phone and email to help you. www.ezturnsignalkit.comNevermind, i will just see what the directions say. Thanks
Honda Pioneer - Street Legal Turn Signal Lights Horn Kit SxS 500 700 1000 1000-4
Not sure what you guys use for this but I highly recommend EZturnsignals . Cisco has everything you need ,reasonably priced . I have bought street legal kits , turn signal kits and others . He sells led stuff so very low current draw and everything comes with step by step instructions and pictures . If you need more help he (Cisco , the owner) is available by phone and email to help you .www.ezturnsignalkit.com
#19 HUCK, A moment ago