P1000 Stock wheel sizes?

B

bierman325

New Member
May 24, 2021
2
1
3
Illinois
Ownership

  1. 1000-5
I have a 2020 Pioneer 1000-5. Long story short, I’ve been given 1 factory maxxis bighorn in a 27x9x14 for the front and also 1 in a 27x11x14 for the rear. I’ve been trying to find cheap stock steel rims just to have as spares while hunting/trail riding. I’ve been able to find one around $60 just in a 14-7 but I’ve checked threads and cannot find the answer ANYWHERE. I am curious on what stock wheel sizes are and if a 14-7 wheel will mount. I am also aware of the bolt pattern needing to be 4x137. Obviously the rears and plenty wide but didn’t know if they would just bubble out after mounting. I greatly appreciate any help. Thanks in advance.
 
Ohio4x4

Ohio4x4

I brought the dishwasher
Lifetime Member
Aug 23, 2018
1,528
15,406
113
Ohio
Ownership

  1. 1000-3
Wheels are measured by diameter x width. Then the offset of the wheel mounting flange. Most wheels you find will be 7" wide. I have 14x7 in both 5+2 and 4+3 backspacing. Either will fit. The honda bolt pattern is 4x136. The 4x137 is close enough that you wont even notice a difference.
 
B

bierman325

New Member
May 24, 2021
2
1
3
Illinois
Ownership

  1. 1000-5
Thank you! Stupid question again... So the 27x11x14 WILL fit on the the 14-7? I do apologize, I’m new to the side by side world lol
 
  • Like
Reactions: ChadD
Ohio4x4

Ohio4x4

I brought the dishwasher
Lifetime Member
Aug 23, 2018
1,528
15,406
113
Ohio
Ownership

  1. 1000-3
Thank you! Stupid question again... So the 27x11x14 WILL fit on the the 14-7? I do apologize, I’m new to the side by side world lol
Yes with lots of sideways bulge. I run 10" wide tires on most of my wheels.
 
  • Like
Reactions: TripleB
Hillbillytnt

Hillbillytnt

Well-Known Member
May 2, 2020
542
1,970
93
Ky
Ownership

  1. 1000-3
I have a 2020 Pioneer 1000-5. Long story short, I’ve been given 1 factory maxxis bighorn in a 27x9x14 for the front and also 1 in a 27x11x14 for the rear. I’ve been trying to find cheap stock steel rims just to have as spares while hunting/trail riding. I’ve been able to find one around $60 just in a 14-7 but I’ve checked threads and cannot find the answer ANYWHERE. I am curious on what stock wheel sizes are and if a 14-7 wheel will mount. I am also aware of the bolt pattern needing to be 4x137. Obviously the rears and plenty wide but didn’t know if they would just bubble out after mounting. I greatly appreciate any help. Thanks in advance.
Stocks are front 6.5 rear are 8.
 
  • Like
Reactions: Hondasxs