P500 Spacing Out

[Lightjet]

Anybody know of a good Cheaper 1.5" wheel spacer for the rear of my P5? I'm new to this and I have to have a special lug nut tool to get them off (star spline nuts)? does that mean I need a certain stud size on the spacer?

 

[Admin]

 

[Alan_Vander]

Should just be the regular m12x1.50. I believe

Sent from my moto z4 using Tapatalk

 

[Alan_Vander]

Not really sure on the lugnut socket needed without a picture

Sent from my moto z4 using Tapatalk

 

[futzin]

Can't answer your lug nut question, but my advice would be not to use cheap spacers. Learned the hard way on my quad. Had studs snapping off on the first ride (low speed, smooth terrain). Sent them back for refund, bought good ones with hardened studs and good ever since.

 

[Lightjet]

Can't answer your lug nut question, but my advice would be not to use cheap spacers. Learned the hard way on my quad. Had studs snapping off on the first ride (low speed, smooth terrain). Sent them back for refund, bought good ones with hardened studs and good ever since.

Didn't think about that!

 

[Lightjet]

Didn't think about that!

Is $60 too cheap? Didn't want to pay $100 for only 2 spacers and by good which would go with?

 

[futzin]

Is $60 too cheap? Didn't want to pay $100 for only 2 spacers and by good which would go with?

Can't say. I bought the lowest price ones I could find and paid, so to speak. I don't remember what I paid for the first set or the replacements; I do remember the second set mentioned hardened steel studs. I'm pretty much a noob on mods; others more experienced than me will chime in directly.

 

[NTCPrezJB]

@RB3offroad and @SuperATV are both vendors and both offer spacers I believe. I believe both offer quality products.

 

[Todd627]

@RB3offroad and @SuperATV are both vendors and both offer spacers I believe. I believe both offer quality products.

^^^^this^^^^

 

[JimmyA]

Yep, RB3 is what I have on my 675CC

 

[Lightjet]

Anybody know of a good Cheaper 1.5" wheel spacer for the rear of my P5? I'm new to this and I have to have a special lug nut tool to get them off (star spline nuts)? does that mean I need a certain stud size on the spacer?

Went RB3 1.5 Spacers.....Should be here mid next week! GOT TALKED INTO QUALITY INSTEAD OF SAVINGS! Going to be broke Social Distancing and Teleworkin! Can't get "Your Mom" (Name of My P5) out of my brain..Next Mod? TorQ Locker? Walker Evans?, PWR steering?, Long Travel? (But I Love my Forward Arms!), ......Probably Dual Battery with accessories!

 

[Tstover]

SuperATV 1.5 on all four for me. No complaints, nice quality, what man doesn’t like a shiny piece of machined aluminum in their hands, and then on their machine??

 

[Russ989]

@RB3offroad and @SuperATV are both vendors and both offer spacers I believe. I believe both offer quality products.

SuperAtv has my vote.

 

[trigger]

Initially installed four new 1" spacers for the stock wheels, then went with aftermarket offset wheels and didn't need them anymore so sold them. Changed the setup again and needed four more new 1" spacers. Changed again and only needed one set so sold the other ones. Been running and selling these (to other members, lol) for 4 yrs now. Solid aluminum, tapered lugs, have always used LocTite and checked periodically, they don't move. FWIW

Quad Boss Wheel Spacers Honda Pioneer 500/700

Find the largest selection of UTV parts at UTV Headquarters. We carry side by side accessories for Polaris, Honda, Can-Am, Yamaha, Kawasaki and much more. Our great service, fast shipping and low prices make UTV HQ your one-stop shop for all your UTV accessories. Check out our products today!

utvhq.com