P500 Spacer Question

[William]

I'm switching to 9" wide zillas on stock front rims all around. How much extra spacer will I need on the rear to match the front?

 

[Admin]

 

[trigger]

I'm switching to 9" wide zillas on stock front rims all around. How much extra spacer will I need on the rear to match the front?

Should be 1" spacers if I'm not mistaken. That's a good question for @Chooglin ?

 

[Chooglin]

If you are using the stock rims , they should remain pretty close to the same width front and rear!

 

[William]

If you are using the stock rims , they should remain pretty close to the same width front and rear!

I'm using front rims on back also. So I would think the rear will be narrow?

 

[Chooglin]

You should gain some tire bulge In the front and lose some bulge in the rear.

The front stock rims are 6" wide and the rear rims are 7 1/2" wide

 

[Chooglin]

Are they exactly the same right now with stock tires and rims ?

 

[William]

The mudlite xtr

Are they exactly the same right now with stock tires and rims ?

I have mud lite xtrs 27x11s rear 27x9s front on stock rims. Same width front and rear. But I'm going to front rims on back with 9" tires.

 

[Chooglin]

Ok i think i understand now.
If you are running front stock rims on the front and back with 9" tires all the way around , I think you will be about 1/2" wider in the rear!

 

[William]

Ok i think i understand now.
If you are running front stock rims on the front and back with 9" tires all the way around , I think you will be about 1/2" wider in the rear!

Oh if that's the case I can live with that! I will measure and make sure when I get them on! Thanks!

 

[William]

With this info it should still be close to even...

 

[William]

From measuring the rims I came up with needing 1/2 " more spacer in rear. I ordered 2" spacers as I have 1.5" on now... the rear rims are offset more than the front by 5/8".