P1000 skid plate

[kyrider1000]

Does anyone know where I can get a 4 x 8 sheet of 3/8 UHMW from ? I'm building a skid plate for the ol buggy

 

[Admin]

 

[GovtMule]

@SuperATV has them already made for you!

 

[Scoop]

Trail Armor is what you seek for 1/2" UHMW skid plate sets for the P1K3/5. Pricey, but well worth it.

 

[Red500]

I looked at making my own at one point. It just wasn't worth it.

 

[Scoop]

I looked at making my own at one point. It just wasn't worth it.

The older I get, the more I seem to say that to myself ...

 

[kyrider1000]

For 298.00 dollars for a 4x8 sheet of uhmw , and a 6 pack of some adult beverage vs 700 plus from satv ..... ahh ??????

 

[Scoop]

For 298.00 dollars for a 4x8 sheet of uhmw , and a 6 pack of some adult beverage vs 700 plus from satv ..... ahh ??????

To each their own! 'Murica! Freedom!

 

[Robobrainiac]

https://www.amazon.com/Quiet-Glide-Plate-Pioneer-1000-5-2016-2021/dp/B09N7YB2HK/?tag=sxsweb24-20

I don't know where you can find UHMW shipped to you for 300 but you still have fasteners, drill bits, saw blades, and time to invest on top of that. I love my @SuperATV. I am certain he could get you a prime day coupon.

If you are trying to be as cheap as you can I would just get a tusk

 

[kyrider1000]

https://www.amazon.com/Quiet-Glide-Plate-Pioneer-1000-5-2016-2021/dp/B09N7YB2HK/?tag=sxsweb24-20

I don't know where you can find UHMW shipped to you for 300 but you still have fasteners, drill bits, saw blades, and time to invest on top of that. I love my @SuperATV. I am certain he could get you a prime day coupon.

If you are trying to be as cheap as you can I would just get a tusk

I dont have to have it shipped . i go pick it up . Drill bits / Time / Sawblades ? I have a ton of it . Round over bits for my router to smooth the edges and stainless washers with grade 8 bolts . Yep Im good to go . Also I have a nice set of prints / Templates for it to . Thank yall for the suggestions and comments .. Couple of calls landed the Uhmw and another rider on here offered the templates . This forum is awesome.

 

[Scoop]

https://www.amazon.com/Quiet-Glide-Plate-Pioneer-1000-5-2016-2021/dp/B09N7YB2HK/?tag=sxsweb24-20

I don't know where you can find UHMW shipped to you for 300 but you still have fasteners, drill bits, saw blades, and time to invest on top of that. I love my @SuperATV. I am certain he could get you a prime day coupon.

If you are trying to be as cheap as you can I would just get a tusk

Don't' bother, @Robobrainiac. His end product will cost 1/3 as much, take 1/3 the time to manufacture and install, and be 3x as superior to anything you could possibly buy with your $700, you low-life beta male ...

🤣🤣🤣🤣🤣

(For those who don't know me, that was 99 and 44/100ths percent pure sarcasm)

 

[kyrider1000]

Don't' bother, @Robobrainiac. His end product will cost 1/3 as much, take 1/3 the time to manufacture and install, and be 3x as superior to anything you could possibly buy with your $700, you low-life beta male ...

🤣🤣🤣🤣🤣

(For those who don't know me, that was 99 and 44/100ths percent pure sarcasm)

WHAT ?? Damn you sound butt hurt because I want to build something for myself and learn something new ? Bro , we all share the same trail , whether you have a 25000 dollar buggy or a 2500 dollar one . Whether you build some accessories yourself or have them made for you . So dont put words in my mouth and put people down . Just wanting to learn my ol buggy and work on it myself .

Once again thanks for the help , its a great day to be alive
God bless and ride em safe !

 

[Scoop]

WHAT ?? Damn you sound butt hurt because I want to build something for myself and learn something new ? Bro , we all share the same trail , whether you have a 25000 dollar buggy or a 2500 dollar one . Whether you build some accessories yourself or have them made for you . So dont put words in my mouth and put people down . Just wanting to learn my ol buggy and work on it myself .

Once again thanks for the help , its a great day to be alive
God bless and ride em safe !

You CLEARLY missed the small print at the bottom of my post ... go back and read it.

 

[Scoop]

P.S. @kyrider1000 -

In case you can't read it, it says:

(For those who don't know me, that was 99 and 44/100ths percent pure sarcasm)

Advice: Try the decaf ...

 

[Neohio]

Look up industrial plastic suppliers in your area. Mcmaster is always an option, but freight will be a bit.

 

[JenElio]

WHAT ?? Damn you sound butt hurt because I want to build something for myself and learn something new ? Bro , we all share the same trail , whether you have a 25000 dollar buggy or a 2500 dollar one . Whether you build some accessories yourself or have them made for you . So dont put words in my mouth and put people down . Just wanting to learn my ol buggy and work on it myself .

Once again thanks for the help , its a great day to be alive
God bless and ride em safe !

If I would've had a supplier cheap/close enough to me I would've done the same with UHMW. Instead I did mine out of 1/4" aluminum and been happy with it so far. $210 all in plus my time in the garage which I would've spent regardless on something or other......I like working on my own shît.

Tip: if you get a 5X10 sheet you can cover/protect 100% of the buggy.

Some pics of whey back when 😂 almost four years getting beat on 👍 (NoMo!!)

Good luck and post pics of the finished product 👍

 

[Scoop]

Looks great, @JenElio! I take back some of the bad things I've said about you. Not all, not most, but some ... 🤣

 

[tjoreo]

I dont have to have it shipped . i go pick it up . Drill bits / Time / Sawblades ? I have a ton of it . Round over bits for my router to smooth the edges and stainless washers with grade 8 bolts . Yep Im good to go . Also I have a nice set of prints / Templates for it to . Thank yall for the suggestions and comments .. Couple of calls landed the Uhmw and another rider on here offered the templates . This forum is awesome.

Glad you got a piece found. I picked up a sheet a couple of years ago, but just haven't got around to doing it. With the CAD files on the forum I figured it was worth my time to save a few bucks. It looks like the sheet I got has gone up quite abit but it still should be satisfying to do it myself when I get around to it.

 

[Scoop]

It looks like the sheet I got has gone up quite abit but it still should be satisfying to do it myself when I get around to it.

So procrastination finally paid off !!!

 

[kyrider1000]

P.S. @kyrider1000 -

In case you can't read it, it says:

(For those who don't know me, that was 99 and 44/100ths percent pure sarcasm)

Advice: Try the decaf ...

Didnt have my readers on . lol Its all good . Ill buy ya a adult beverage of choice ifin your ever down in pioneer tennessee

 

[kyrider1000]

If I would've had a supplier cheap/close enough to me I would've done the same with UHMW. Instead I did mine out of 1/4" aluminum and been happy with it so far. $210 all in plus my time in the garage which I would've spent regardless on something or other......I like working on my own shît.

Tip: if you get a 5X10 sheet you can cover/protect 100% of the buggy.

Some pics of whey back when 😂 almost four years getting beat on 👍 (NoMo!!)
View attachment 395361View attachment 395362View attachment 395360
Good luck and post pics of the finished product 👍

SWEET Great work brother . and the cost ........... even better .