P700 Show Me Your Rocker Panel!

[USMCsilver]

I'm going to be picking up a lightly used 2016 700-4 within a week.

I'm trying to get into my head what I wanna do as far as my rocker panel switches go.

I plan on ordering the mounting plate from mystic1219. However, I'd like some ideas on layouts/designs.

I don't know if I should cram everything into that plate for 6 switches using this: Six Position V-Series Switch Holder .

Then drill into mystic1219's custom plate for:

• Blue Sea Fast Charge - Dual USB Charger Socket Mount
  
• Blue Sea Mini OLED DC Voltmeter

Or... do I want to just get one of these for the voltmeter and USB plugs and put an additional plate into the dash -- https://amazon.com/dp/B01N6TVID9/?tag=sxsweb24-20

I'll also be adding a RAM Mount for my phone somewhere.

Oh, and also putting this in: https://amazon.com/dp/B00VV6YOD6/?tag=sxsweb24-20 (I'm just gonna use the stereo part and probably ditch the speakers.) I plan on doing some sort of Bluetooth overhead bar one day. For now, I'll just be pushing a portable Bluetooth speaker.

I was hoping you guys could post up some pics of your "dash builds" so I could get some ideas.

Any pictures/ideas are much appreciated!

Thank you!!!

 

[Admin]

 

[JTW]

I'm happy with mine from him!

 

[Eltobgi]

 

[allgm1]

Mines not from mystic but one I made

there are a ton of options out there for usb chargers and volt meters that will fit into a switch slot also I think @mystic1219 probably already has a plate that will accept to usb charger you posted. I know he's very inexpensive and can make custom plates for your needs.

 

[ronhuntin]

Here is my panel I made up with a sheet of carbon fiber.

IMG_6534

• ronhuntin
• Apr 9, 2017

IMG_6534

• ronhuntin
• Apr 9, 2017

 

[swsebek]

Nice work

 

[USMCsilver]

I ended up coming out OK.



Sent from my SM-G935V using Tapatalk

 

[swsebek]

I ended up coming out OK.



Sent from my SM-G935V using Tapatalk

I wished I would have done your rocker setup. I thought four slots was plenty.haha I was wrong

 

[volkspower]

heres mine

 

[BigEddie]

View attachment 38411

Looks great, did you have any problems clearing the bar behind the warning plate?

 

[BigEddie]

I ended up coming out OK.

View attachment 43117

Sent from my SM-G935V using Tapatalk

Looks great, did you have any problems clearing the bar behind the warning plate?

 

[BigEddie]

Mines not from mystic but one I made
View attachment 38413
there are a ton of options out there for usb chargers and volt meters that will fit into a switch slot also I think @mystic1219 probably already has a plate that will accept to usb charger you posted. I know he's very inexpensive and can make custom plates for your needs.

Looks great, did you have any problems clearing the bar behind the warning plate?

 

[USMCsilver]

Looks great, did you have any problems clearing the bar behind the warning plate?

No issues.

Sent from my SM-G965U1 using Tapatalk

 

[Eltobgi]

Looks great, did you have any problems clearing the bar behind the warning plate?

None at all! If you look at from under the hood you can clearly see the area. I recommend starting with a smaller than needed hole for yours switches and enlarging as needed. Slow but sure

 

[BigEddie]

None at all! If you look at from under the hood you can clearly see the area. I recommend starting with a smaller than needed hole for yours switches and enlarging as needed. Slow but sure

Great, thank you!

 

[BigEddie]

No issues.

Sent from my SM-G965U1 using Tapatalk

Thank you!